11.07.2015 Views

GEA COM4plus - CS Klimateknik

GEA COM4plus - CS Klimateknik

GEA COM4plus - CS Klimateknik

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Transport and Storage<strong>GEA</strong> <strong>COM4plus</strong>4 Transport and Storage4.1 DeliveryThe unit can be delivered as a complete unit or as individual sections on transport pallets.• When the unit is delivered, check that the delivery is correct according to thedelivery note and verify that the shipment is complete.NOTEObserve the information regarding transit damage on the packaging or in thedelivery notes.What steps should you takein the event of transitdamage?Packaging damaged externally1 Unpack the equipment in the presence of the lorry driver and have the damageacknowledged in the shipping order.2 Inform the <strong>GEA</strong> sales subsidiary immediately.No signs of external damage to packaging, contents damaged1 Once you have established the extent of the damage, notify the <strong>GEA</strong> salessubsidiary in writing.2 Document the situation photographically.3 Any transit damage must be reported no later than 4 days following delivery.Processing of claims will not be possible unless the above steps have been taken.In both cases consult the <strong>GEA</strong> sales subsidiary before installing the units.4.2 TransportationNOTEOnly transport the unit in its original packaging.Only remove the original packaging just before the installation starts.• Only transport the unit using the transport lugs/devices provided by themanufacturer.• Wear safety footwear and gloves when transporting the unit to ensure your safety.DANGER DUE TO OVERHEAD LOADS!Never enter the area beneath freely suspended loads as there is always thedanger that hoisting devices, lifting accessories or ropes/chains may be damaged,which may lead to serious injury or death.• Before transporting the unit, make sure that all doors, panels with sash fastenersand panels are closed and secured.• Only use hoisting devices with sufficient load-carrying capacity.• Never use damaged hoisting devices.• Ropes/slings should not be knotted or come into contact with sharp edges.• Only use ropes/chains of the same length.• Move the unit carefully without sudden or jerky movements.• Do not set the unit down abruptly or bump it.20 PR-2009-0022-GB • Subject to modifications • Status 04/2009

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!