GEA COM4plus - CS Klimateknik

Installation and AssemblyGEA COM4plusNOTETransportation lugs/device must not be used to suspend the units on a permanentbasis.Transportation lugs/device may be used only once.5.2.2 Installation of individual modulesTo assemble individual modules (dividing joint) proceed as follows:• Affix provided sealings to the dividing joint(speacial assembly instructions provided with the sealings).Fig. 5-8:Installing individual modulesDAMAGE TO THE UNIT!Do not attach tensioning belts/hoisting devices to heat exchanger connections,condensate drains and door handles or use these to pull or push the equipment!•• Position the unit parts as close to one another as possibleprior to assembly. Only use the unit base frame to pull theindividual components together. Units that do not have abase frame must be pulled together with tensioning belts.These must be positioned round the profiles in the base orroof area.Fig. 5-9:Unit with base frame28 PR-2009-0022-GB • Subject to modifications • Status 04/2009