DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation - Urmet

More documents

Recommendations

Info

BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACEMENT OPTIONS FOR RANGER, EXPLORER, VEDETTE AND SENTINEL IN TRADITIONAL CALL SYSTEM VIDEO DOOR PHONES SYSTEMS REPLACEMENT OPTIONS FOR RANGER, EXPLORER, VEDETTE AND SENTINEL IN TRADITIONAL CALL SYSTEM VIDEO DOOR PHONES SYSTEMS RANGER VIDEO DOOR PHONES WINFLAT+ BRACKET Ref. 1202/590 FOR ADAPTING COAX VIDEO DOOR PHONE SYSTEMS Ranger video door phones Ref. 1201/1 (and respective brackets Ref. 1201/90) can be replaced in traditional call video door phone systems with Atlantico video door phones Ref. 1702/1 and specifi c bracket Ref. 1202/590. The terminals on Ref. 1202/590 brackets have the same numbers as the Ref. 1201/90 brackets to replace simply by connecting the wires in the same way. Note that the replacement is only possible in systems fi tting Ranger basic model Ref. 1201/1 with bracket Ref. 1201/90. It is not possible in systems with switchboard, special systems and intercom systems because bracket Ref. 1202/590 is not suitable for replacing special brackets Ref. 1201/91, Ref. 1201/761, Ref. 1201/711, Ref. 1201/731 and Ref. 1201/751. WINFLAT+ BRACKET Ref. 1202/591 FOR ADAPTING VIDEO DOOR PHONE SYSTEMS WITHOUT COAXIAL CABLE Ranger video door phones Ref. 955/5 with brackets Ref. 955/74 can be replaced in 5-wire systems with Atlantico video door phones Ref. 1702/1 using adapter bracket Ref. 1202/591. Replacement is only possible in basic systems. EXPLORER, VEDETTE, SENTINEL AND VIDOFONO VIDEO DOOR PHONES SENTRY VIDEO DOOR PHONE WITH BRACKET Ref. 1704/20A FOR ADAPTING EXPLORER, VEDETTE, SENTINEL AND VIDOFONO SYSTEMS EXPLORER, VEDETTE and SENTINEL video door phones can be replaced with SENTRY+ Ref. 1704/20A video door phones in traditional call video door phone systems. SENTRY+ Ref. 1704/20A is a video door phone with a 4.5” kinescope screen arranged on the longest side in the horizontal direction. The SENTRY+ Ref. 1704/20A bracket terminals have the same numbers as the EXPLORER, VEDETTE, SENTINEL and VIDOFONO terminal boards to simply connect the wires in the same way. This video door phone can be fi tted only in traditional basic systems (with 12Vac call). It is not suitable for use in switchboard or intercom systems because the bracket is not suitable to replace all versions. SENTRY+ Ref. 1704/20A is complete with bracket and white. The monitor is a refl ex version; brightness and contrast can be adjusted by means of the controls. The call signal is sent to the buzzer fi tted on the bracket. The door lock can be released by pressing the “ ” button. The two service buttons “ ” and “ ” can be used to operate accessory circuits. SENTRY+ Ref. 1704/20A video door phones are used to view the picture from a camera arranged to frame a fi eld with the longest side arranged vertically. This arrangement causes a 25 to 30% reduction of the framed fi eld with respect to EXPLORER, VEDETTE, SENTINEL and VIDOFONO video door phones. TO THE FOLLOWING VIDEO DOOR PHONES Sentry+ Sentry+ Vedette,Vidofono Sentinel,Explorer − (C3) − [1] − (C2) − [2] − (C5) − [6] − (C9) − [10] − (C1) − [7] − (C4) − [9] − (C7) − [X1] − (C10) − [X2] − (C6) − [Y1] − (C8) − [Y2] RISING COLUMN Ref.1704/20 Explorer Sentinel Scout Vedette Vidofono Sentry+ video door phone is provided with an additional speaker to considerably increase volume of the call. Connecting the wires to the system is fast via terminal boards on the bracket to which the video door phone is then fi tted. 20 −−−− sec.1f DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
The device is provided with the following controls: • One door opening button ( ). • Two service buttons ( and ) which can be used, for example, to switch on the staircase lights, open an additional lock or to implement automatic switch-on function. • Two potentiometers for adjusting picture brightness ( ) and contrast ( ). • One switch for three-position call tone volume adjustment ( ) (minimum, medium and maximum volume). TECHNICAL SPECIFICATIONS Power voltage: 16 ÷ 18.5Vdc Intake: Working: max. 0.65A Stand-by: 0A Power: Working: max. 12W CCIR version: Vertical frequency 50Hz ± 2Hz Horizontal frequency: 15625 ± 400Hz EIA version: Vertical frequency 60Hz ± 2Hz Horizontal frequency: 15734 ± 400Hz Video signal: 1Vpp 75Ω nominal 1Vpp. -6 dB minimum Kinescope: 4.5” 90° neck 20mm Switch-on delay: 7” max X-rays: none Operating temperature range: -5°÷ + 50°C Humidity: max. 90% RH TERMINAL BOARD REPLACEMENT OPTIONS FOR RANGER, EXPLORER, VEDETTE AND SENTINEL IN TRADITIONAL CALL SYSTEM VIDEO DOOR PHONES SYSTEMS 1 Speaker signal CA Call signal 2 Microphone signal 6 } Power ground 10 9 Door opener control X1 } Service button terminals X2 Y1 } Service button terminals Y2 R3 Silent video on R1 Video power negative R2 Video power positive RT Secondary monitor power positive V4 Composite video signal for second monitor in-out connection (connect a 75Ω resistor between V4 and V5 if not present) V5 Video signal earth V3 Composite video signal INSTALLATION Arrange the duct so that it ends in correspondence with the input hole on the bracket and proceed as follows: 1) Fasten the bracket to the wall at the height from the fl oor shown by means of the four screws. 2) Connect the wires to the specifi c terminals. 3) Extract the retainer hook A by inserting the tip of a screwdriver and pulling the hook downwards. 4) Check that switch on back of video door phone is in the A position. 5) Fasten the monitor to the bracket. 6) Fasten the monitor by pushing the retainer hook A upwards. DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation Diagrams 230 mm A B 200 mm Service button Service button Door opener button Call volume Contrast adjustment Brightness adjustment A 99 mm Bracket 1,55 m sec.1f−−−− 21 INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY BASIC SYSTEM DIAGRAMS
Page 1 and 2:
INDEX DOOR PHONE - VIDEO DOOR PHONE
Page 3 and 4:
INDEX DOOR PHONE - VIDEO DOOR PHONE
Page 5 and 6:
DOOR PHONE - VIDEO DOOR PHONE SYSTE
Page 7 and 8:
INSTRUCTIONS FOR INSTALLER The prod
Page 9 and 10:
The power supplies have two negativ
Page 11 and 12:
“1+1” wire door phone system VI
Page 13 and 14:
C4.016 - Sinthesi models only: The
Page 15 and 16:
VX.018 - Connect the following jump
Page 17 and 18:
Page 19 and 20:
SECTION 1A CONTENTS DOOR PHONE AND
Page 21 and 22:
Number of main panels to be install
Page 23 and 24:
FUNCTION CONNECTION OF UP TO 2 DOOR
Page 25 and 26:
POWER SUPPLY FOR DOOR PHONE SYSTEM
Page 27 and 28:
F E D C B A MAIN~ POWER SUPPLY FOR
Page 29 and 30:
F E D C B A CONNECTION OF 6 DOOR PH
Page 31 and 32:
TO THE FOLLOWING MODULE Name tag li
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
(VX.006) (VX.006) TONE GENERATOR CO
Page 43 and 44:
MAIN ~ ~ ~ 12 6 ~ + -~ 6 0 PS POWER
Page 45 and 46:
ADDITIONAL POWER UNIT POWER SUPPLY
Page 47 and 48:
ADDITIONAL POWER UNIT POWER SUPPLY
Page 49 and 50:
A (VX.006) ~ ~ ~ ~ 12 0 10 CA MAIN
Page 51 and 52:
A B (VX.006) ADDITIONAL POWER UNIT
Page 53 and 54:
INTERCOMMUNICATING CONNECTION OF 2
Page 55 and 56:
4 3 2 1 INTERCOMMUNICATING CONNECTI
Page 57 and 58:
INTERCOMMUNICATING CONNECTION OF MA
Page 59 and 60:
CONNECTION OF 1 MAIN DOOR PHONE TO
Page 61 and 62:
(C4.003) (VX.006) (VX.021) (C4.014)
Page 63 and 64:
Name tag lighting G/T ~0 ~12 ~12 ~0
Page 65 and 66:
Page 67 and 68:
Name tag lighting (VX.006) (VX.021)
Page 69 and 70:
Name tag lighting 2 1 G/T ~0 ~12 ~1
Page 71 and 72:
Page 73 and 74:
Name tag lighting INTERCOMMUNICATIN
Page 75 and 76:
FROM RISING COLUMN CALL CONNECTION
Page 77 and 78:
CA 1 2 6 9 10 (VX.006) CA 1 2 6 9 1
Page 79 and 80:
Page 81 and 82:
(C4.014) (VX.006) (VX.021) (C4.014)
Page 83 and 84:
Page 85 and 86:
SECTION 1B CONTENTS DOOR PHONE AND
Page 87 and 88:
CONNECTION OF SEVERAL DOOR PHONES T
Page 89 and 90:
Name tag lighting (C1.002) CONNECTI
Page 91 and 92:
B G/T ~0 ~12 ~0 ~12 CONNECTION OF S
Page 93 and 94:
Name tag lighting ~12 ~0 ~ ~ P.E. S
Page 95 and 96:
To the following module Name tag li
Page 97 and 98:
MAIN ENTRY (C4.017) Name tag lighti
Page 99 and 100:
SWITCH N.N.F. CONNECTION OF 1 DOOR
Page 101 and 102:
Page 103 and 104:
SECTION 1C CONTENTS DOOR PHONE AND
Page 105 and 106:
Page 107 and 108:
Name tag lighting MAIN ~ G/T ~0 ~12
Page 109 and 110:
TO THE FOLLOWING MODULES Name tag l
Page 111 and 112:
TO THE FOLLOWING MODULES Name tag l
Page 113 and 114:
Page 115 and 116:
SECTION 1D CONTENTS DOOR PHONE AND
Page 117 and 118:
WITH COLOUR CAMERA SECTION 1D CONTE
Page 119 and 120:
CONNECTION OF MAX. 2 VIDEO DOOR PHO
Page 121 and 122:
(VX.010) (VX.011) R2 R1 V4 V5 V3 R2
Page 123 and 124:
TO THE FOLLOWING VIDEO DOOR PHONES
Page 125 and 126:
R1 R2 in R2 out RL R1 ~ ~ ADDITIONA
Page 127 and 128:
CONNECTION OF SEVERAL VIDEO DOOR PH
Page 129 and 130:
SEE DIAGRAM SV102-3229 pag.51 DIAGR
Page 131 and 132:
(VD.002) VIDEO POWER SUPPLY (VX.008
Page 133 and 134:
TO THE FOLLOWING MODULE TC Name tag
Page 135 and 136:
TO THE FOLLOWING MODULE TC (C4.016)
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Name tag lighting (VD.002) ~0 ~12 G
Page 143 and 144:
CONNECTION OF MAXIMUM 9 INTERCOM At
Page 145 and 146:
TC CONNECTION OF 3 INTERCOM Atlanti
Page 147 and 148:
POWER SUPPLY Ref.789/2 R2 R1 R2 in
Page 149 and 150:
SUPPLEMENTARY POWER SUPPLY R2 R1 R2
Page 151 and 152:
FROM RISING COLUMN CONNECTION OF 3
Page 153 and 154:
LINE~ LINE~ LINE~ (VX.008) 0 CONNEC
Page 155 and 156:
VIDEO POWER SUPPLY CONNECTION OF SE
Page 157 and 158:
CONNECTION OF SEVERAL VIDEO DOOR PH
Page 159 and 160:
Name tag lighting TC (C4.016) (VD.0
Page 161 and 162:
Name tag lighting TC (C4.007) ~0 ~1
Page 163 and 164:
Name tag lighting TC CONNECTION OF
Page 165 and 166:
Name tag lighting TC CONNECTION OF
Page 167 and 168:
SEVERAL RISER IN EACH RISER THE CAB
Page 169 and 170: B/W COLOUR EXAMPLE OF CONNECTION TV
Page 171 and 172: DOOR PHONE - VIDEO DOOR PHONE SYSTE
Page 173 and 174: SECTION 1E CONTENTS DOOR PHONE AND
Page 175 and 176: CONNECTION OF 2 VIDEO DOOR PHONES T
Page 177 and 178: FUNCTION CONNECTION OF 2 VIDEO DOOR
Page 179 and 180: Name tag lighting TC (CU.009) P. E.
Page 181 and 182: (C4.018) CONNECTION OF SEVERAL VIDE
Page 183 and 184: (CU.009) "1" TC (VU.002) Push butto
Page 185 and 186: "3" "4" (C4.016) (CU.009) (C4.016)
Page 187 and 188: "3" "2" Name tag lighting TC (CU.00
Page 189 and 190: TC Name tag lighting To the followi
Page 191 and 192: Name tag lighting (CU.009) (C4.017)
Page 193 and 194: Name tag lighting LIGHT BULB TRANSF
Page 195 and 196: TC CONNECTION OF 4 VIDEO DOOR PHONE
Page 197 and 198: To the following module Name tag li
Page 199 and 200: SWITCH NNF SV102-1470C: CONNECTION
Page 203 and 204: INTERCHANGEABLE DEVICES DOOR PHONE
Page 205 and 206: REPLACING RELAY POWER UNIT Ref. 786
Page 207 and 208: REPLACING DOOR PHONE POWER UNIT Ref
Page 209 and 210: REPLACING VIDEO DOOR PHONE POWER UN
Page 211 and 212: SENTINEL, EXPLORER AND RANGER WITH
Page 213 and 214: REPLACING DOOR PHONE POWER UNITS Re
Page 215 and 216: REPLACING RELAY BOXES Ref. 788/21,
Page 217 and 218: REPLACING RELAY BOX Ref. 9332/5 AND
Page 219: REPLACING RELAY BOX Ref. 9332/5 AND
Page 223 and 224: REPLACING DOOR PHONE POWER UNIT Ref
Page 227 and 228: ELECTRONIC INTERCOM SYSTEM Mod. 926
Page 229 and 230: FEATURES The power supply 926/3 is
Page 231 and 232: WIRE SECTION The section of the wir
Page 233 and 234: ELECTRONIC INTERCOM SETS Mod.926 CO
Page 235 and 236: ELECTRONIC INTERCOM SETS Mod.926 IV
Page 237 and 238: ELECTRONIC INTERCOM SETS Mod.926 Re
Page 239 and 240: ELECTRONIC INTERCOM SETS Mod.926-Re
Page 241 and 242: ELECTRONIC INTERCOM SETS Mod.926-Re
Page 243: Today, you can observe, retrieve in
show all

DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation - Urmet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?