k-SySTEMS iVF Workstations

More documents

Recommendations

Info

ivf workstations - L200The 200 Series WorkstationsThe 200 Series are biological safety cabinets - protecting both theproduct and the operator.For maximum protection of the operator against hazardous orpotentially hazardous microorganisms, this microbiological safetycabinet is equipped with a complete air velocity control system.Two HEPA-filters as well as recirculation of the air flow (70%recirculation - 30% Exhaust through HEPA-filter) guarantees thesafety of operator while working at a BioSafety Cabinet. The averageair velocity inside the work chamber is 0.35 m/s. The air velocity ismeasured with an external aneometer inside the work chamber inan horizontal plane according to the EN12469 standards.The control panel is conveniently incorporated into the table plateand easy to reach. The table plate is developed to assure a correctwork position.There are 2 different models to choose from:L 224 - 4 foot (120cm)L 226 - 6 foot (180cm)Options for both models include built-in monitor, electrical socketand incorporated UV-light with timer.The K-Systems BioSafety Cabinets are developed according to thestandards of the EN12469 - one of the most important standards inthe EU for setting the standards for BioSafety Cabinets.As standard, all models have a constant temperature controlledtable top based on the AluHeat Systems – prepared for one or twostereomicroscopes and light bases. All models have as a standardK-SYSTEMS AluHeat TechnologyAluHeat was developed by K-systems and is a result of years ofexperience in manufacturing heat exchangers.AluHeat is an aluminium composite construction with an integratedwarming element and temperature sensors.The warmed mass of aluminium gives off a solid distribution of warmthand secures an even and stable temperature of the table top, which isresistant to thermal shock. Thermal shock is caused by overshooting thetemperature when, for example, a cold element is placed on the tabletop. This typically happens when using electrical heating systems.Advantages such as low maintenance, improved heating of the criticalarea around the light opening, and the absence of a noisy source ofcontamination i.,e. water bath, have proven to be invalauble in morethan 1,500 AluHeat system installed world wide.the K-SYSTEMS warmed glass stage incorporated into the tabletop. As an option we offer a stand alone gassing and humidificationsystem – GH01- making it possible to avoid large fluctuations inCO 2 conditions.For more information on standard features and options please seepage 21-22.The class II workstation from K-SYSTEMS has easy access forcleaning due to the convenient and accessible tray below thetable plate. The advantage is that both microscope light base andmicroscope can remain mounted on the table top during cleaning.Two year warranty.www.k-systems.dk 19
ivf workstations - L200Workstations prepared for oneStereomicroscopeL224 IVFDesigned as a single workplaceand for the mounting of astereomicroscope, right sided(standard) or left sided.Overall dimensions (WxDxH):1246x800x2020 mm /49x32x80”L226 IVFDesigned as a single workplaceand for the mounting of astereomicroscope, right sided(standard) or left sided 6 foot,180 cm.Overall dimensions (WxDxH):1846x800x2020 mm /73x32x80”Workstations prepared for twoStereomicroscopesL226 Dual IVFDesigned as twoworkplaces and formounting of twostereomicroscopes.A dual workstationoffers the potential tosimultaneously set up aperfect rotation system /organize division of workand keep the workflow ofindividuals undisturbed.Overall dimensions(WxDxH):1846x800x2020 mm /73x32x80”For available options see page 22.Standardfeatures:Warmed Glass Stage The Control Panel Vertical Laminar Air FlowWarmed Area of the Table Top20www.k-systems.dk
Page 2 and 3: ivf workstations - G603Microscope,
Page 4 and 5: ivf workstations - l100K-SYSTEMS IV
Page 6 and 7: ivf workstations - l100Workstations
Page 8 and 9: Standard features - L100Standard fe
Page 10 and 11: optional features - L100Extra Large
Page 14 and 15: Standard features - L200Standard fe
Page 16: features - L200L200 IVF Standard Fe
Page 20 and 21: optional features - l400Optional fe
Page 22 and 23: laminar flow hoodsTechnical specifi

k-SySTEMS iVF Workstations

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?