k-SySTEMS iVF Workstations

optional features - l400Optional featuresWarmed Glass StageEmbryos are sensitive to temperature fluctuations.A controlled heating temperature system can be integrated in themicroscope light opening. The system is controlled on the controlpanel and provides the highest stability of the media in the culturedishes during microscopy.Order code: 53381!Warming Blocks must not be used on the warmed glassstage. This will damage the warmed glass stage.The Humidified Gas SystemIn the 400 series a stand alone humidified gas system, GH01, canbe offered. The GH01 is plugged in into the inner-wall, has a digitalflow meter and a choice of flow rate between 0-50 litres per hour.The flow rate is adjusted on the analog proportional needle valve,positioned on the side of the cabinet for easy access. The waterfor humidification of the gas is heated up to 39,5 °C by a heatingelement. This level of temperature ensures approximately 37,5°C atthe exit point of the supplied length of tubing. For more informationsee page 40.Order code: 31059Temperature accuracy of +/-0.4ºCUV-LightOn request a UV-light with timer can be incorporated.Available for all series.Order code: 11184The Table Top –Extra Large Warmed AreaAs a standard, the table top is partially warmed around the workarea of the microscope. As an option, an extra-large warmed area ofthe workstation can be incorporated. (not possible on L423 or L426Dual.Order code: 23052 (L424)Order code: 53176 (L426)Electrical outlet inside the cabinetOn request, electrical outlets can be provided. Number andplacement depends on the type of your Workstation.Order code: 11182L400 IVF Standard FeaturesL423IVFL424IVFL426IVFL426DualVertical Laminar Flow X X X XV.O.C Pre-filter & HEPA FILTRATION X X X XAluHeat technology X X X XPreparation for a Stereomicroscope Right Side X X XPreparation for a Stereomicroscope Left Side X X XPreparation for 2 Stereomicroscopes (right & Left position)XHeating surface with 3 Thermal Sensors per working area ( 6 thermal Sensors in L426 Dual) X X X XCounter for usage hours of the fans in the Menu System X X X XTwo speed for the fan ( High & Low) X X X XHEPA Filter Alarm indicating HEPA filter need to be checked X X X XProgramming for an automactic start up of the workstation X X X XControl of the Light Intensity of the K-systems light source from the control panel X X X XL400 IVF Optional FeaturesExternal Humidification System GH01 • • • •Extra Large Heated Area • •Incorporated UV Light • • • •Incorporated K-Systems Heated Glass Stage • • • •90 mm Light source Opening • • • •Electrical socket 1 unit - placed on the left • • • •Intergration of additional Electrical sockets (only L426 Dual-sensor placement) • •Incorporation of a Light Source LS12 / LS11 • • • •Not applicable X Standard • Optionalwww.k-systems.dk 27