k-SySTEMS iVF Workstations

ivf workstations - G603Microscope, light source and camerasMost microscopes can be integrated into the G603. Also modelswith ergo tubes can be integrated.The unit is delivered with the K-SYSTEMS LS12 light source withintegrated light intensity control using the main keyboard.PT-100 temperature sensorEnlarged top front window for maximum comfortG603 has been made with an extra large hole covered by a specialair tight fabric.The enlarged hole for microscope oculars allow the user to movethe microscope and the oculars in the desired positioning and givesexcellent fit for any user and supports larger microscopes.Digital interface supporting wide range of camerasThe G603 supports the new camera interfaces available in themarket such as USB, Firewire or HDMI. Analogue interface is alsoavailable.Innerwall G603Depending on the type of the microscope camera, one of the abovementionedconnectors can be incorporated.External Quality ControlFor improved external quality control – it is possible to do externalmeasurements of CO 2 and Temperature. No disassembling of theunit will be required since a special opening has been made on theback of the G603 for reaching this sensor without any tools. Thehole is blinded with a removable plastic insert. The sensor can easilybe connected / removed due to calibration purposes.External CO 2 Vaisala sensor (option)• For quality control to comply with new EU regulations• To be connected to handheld CO 2 monitor or central monitoringsystemExternal temperature sensor (option)• To detect temperature fluctuations• For improved temperature control• Prepared for pin sensor PT100 element or othersBackwall G603Easy access for CO2 andtemperature sensorwww.k-systems.dk 9