warning - Coastal Winair

Oil Burner Installation InstructionsModels BAYRBF03ABURNA (BF3) andBAYRBF05ABURNA (BF5)▲!CAUTIONBefore opening the boiler door, disconnect burnercord at the plug.NOTE: The burner settings used in this manualwere obtained under laboratory conditions and mayvary from those obtained in the actual installationof the burner. Combustion results must be verifiedusing proper combustion test equipment. Themanufacturer of the burner and boiler will not beresponsible for the improper installation or set-upof the appliance.It is mandatory that a combustion analysis beconducted at initial startup and at least annually aspart of boiler maintenance. Analysis should includesmoke number, CO2 % and CO ppm.PACKAGE LISTYour Riello BAYRBF03ABURNA (BF3) orBAYRBF05ABURNA (BF5) burner should includethe following parts. Please check to make sure allparts are present before beginning the installation.QTY. DESCRIPTION (parts bag)1 - Burner assembly with factory assembled, prewired,wiring harness with 7 pin polarized plug1 - Mounting Gasket1 - Installation Manual1 - Parts Bag, including:1 - NPT - NPFT pipe adapter1 - By-pass plugNozzle(s) as follows:(BF3) 1 - Delavan Nozzle 0.55x80° B(BF5) 2 - Delavan Nozzles, 1.00x60° Wand 1.20x60° BBAYRBF03ABURNA, BAYRBF05ABURNA OIL BURNER TECHNICAL DATABEFDACFigure 30Table 8DIMENSIONSMODEL A in.(mm) B (in./mm) C (in./mm) D (in./mm) E (in./mm) F (in./mm)BAYRBF03ABURNA 9-13/16 (249) 11-1/4 (286) 7-1/2 (193) 3-1/2 (89) 2 (51) 16-1/4 (413)BAYRBF05ABURNA 9-13/16 (249) 11-1/2 (292) 7-1/2 (193) 3-1/2 (89) 2 (51) 16-3/4 (425)18-CG03D1-432