16.08.2012 Views

Cayman, Cayman S

Cayman, Cayman S

Cayman, Cayman S

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Manual Transmission, Clutch<br />

The positions of the gears are shown on the shift<br />

diagram on the gearshift lever.<br />

Warning!<br />

Risk of accident, resulting in serious personal<br />

injury or death.<br />

f Do not obstruct the pedal travel with floor mats<br />

or other objects.<br />

Nonskid floor mats of the correct size are<br />

available at your authorized Porsche dealer.<br />

176 Shifting Gears<br />

To avoid damage to the clutch and transmission:<br />

f Always depress the clutch pedal fully when<br />

changing gears. Make sure that the gearshift<br />

lever is completely engaged.<br />

f Only shift into reverse when the car has come<br />

to a complete stop.<br />

f When shifting gears, always ensure that the<br />

clutch pedal is fully depressed and the gear<br />

has fully engaged.<br />

f Select reverse only when vehicle is stationary.<br />

Reverse gear can be engaged after shifting the<br />

gearshift lever as far as possible to the left.<br />

f Select an appropriately low gear on upward<br />

and downward slopes.<br />

This will ensure optimum use of engine power<br />

and engine braking.<br />

When reverse gear is selected and the ignition is<br />

on, the backup lights are illuminated.<br />

Permitted engine speed<br />

f You should change into a higher gear before<br />

the needle reaches the red mark on the<br />

tachometer, or ease off the accelerator.<br />

If the red zone is reached during acceleration, fuel<br />

feed is interrupted.<br />

Caution!<br />

Risk of engine damage (overrevving) when<br />

shifting down to a lower gear.<br />

f Take care not to exceed the maximum<br />

permitted engine speed when shifting down.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!