16.08.2012 Views

Cayman, Cayman S

Cayman, Cayman S

Cayman, Cayman S

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

A - Automatic speed control readiness off/on<br />

1 - +SPEED/SET (accelerate/store)<br />

2 - –SPEED (decelerate)<br />

3 - OFF (interrupt)<br />

4 -RESUME<br />

Automatic Speed Control<br />

The automatic speed control maintains any<br />

selected speed between 15 mph and 145 mph<br />

(30 km/h and 240 km/h) without you having to<br />

use the accelerator pedal.<br />

The automatic speed control is operated with the<br />

lever on the steering wheel.<br />

86 Operation, Safety<br />

Vehicles with PDK<br />

Downshifts are carried out to help maintain the<br />

pre-selected speed (especially when driving downhill).<br />

Warning!<br />

Risk of an accident resulting in serious personal<br />

injury or death. A constant speed may<br />

not be safe in heavy traffic, or on winding or<br />

slippery roads.<br />

With the speed control system engaged, the<br />

engine speed will not return to idle when removing<br />

the foot from the accelerator pedal.<br />

f Do not use the speed control when it may be<br />

unsafe to keep the car at a constant speed.<br />

f Observe all local and national speed limits.<br />

Switch automatic speed control<br />

readiness on<br />

f Press button A on the automatic speed control<br />

lever.<br />

This green indicator light in the<br />

speedometer now indicates readiness<br />

Hold and store speed<br />

f Bring the car to the desired speed with the<br />

accelerator.<br />

f Then briefly push the operating lever forward<br />

(position 1).<br />

Accelerating (e.g. to overtake)<br />

Option 1<br />

f Increase the speed as usual with the<br />

accelerator.<br />

When you ease off the accelerator, the<br />

previously saved value is set again.<br />

Option 2<br />

f Push operating lever forward (position 1) until<br />

the desired speed is reached.<br />

The speed reached is maintained and stored<br />

when the lever is released.<br />

Option 3<br />

f Push lever slightly forwards (position 1)<br />

(a maximum of 10 times).<br />

The speed is increased by 1 mph (1.6 km/h),<br />

each time the lever is pushed forwards.<br />

Note on operation<br />

Speed control operation is automatically interrupted<br />

if the speed is increased by more than approx.<br />

16 mph (25 km/h ) for longer than 20 seconds.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!