Cayman, Cayman S

7. Fit the lamp housing by first inserting the tab
into the rear opening and then swivel the
housing into installation position.
8. Screw in both screws.
9. Insert the cover with the two tabs into the
openings and then carefully press in the cover
in direction of arrow.
Make sure that the cover is seated correctly.
10.Check operation of the headlight.
Changing bulb for side marker light
1. Remove the cap in the wheel housing liner with
a screwdriver.
2. Insert the screwdriver into the opening in the
wheel housing liner parallel to the side marker
housing (in direction of travel).
By pressing with the screwdriver, disengage
the securing spring of the side marker
housing.
Practical Tips, Emergency Service 255