Hauptwerk Experience2 - Randall Mullin Website

Click on a note on the top keyboard and use Hauptwerk’s designation of
channels for the keyboards:
Solo is Channel 5,
Swell is Channel 3,
Great is Channel 2,
and Choir is Channel 4.
(The pedalboard will be Channel 1, but that is configured separately.)
Assign the channels by checking (ticking) the box next to the Channel
number, then choose Input I, and make sure that you see Expression (11)
listed to the right (see Appendix for more information). Disable and un-check
(un-tick) any other channels in the list.
This is the example for my Solo keyboard.
Click on a note on each keyboard in sequence and follow the same
instructions for setting the other keyboard’s channels. In each dialog page
choose “Save.” If you decide to use other channels for these, keep in mind
that all of the divisional pistons already come configured for these
channels in Hauptwerk. If you change the channels you will have to
remap all of them in Hauptwerk, an unnecessary pain.
The General Settings Tab
25