Hauptwerk Experience2 - Randall Mullin Website

More documents

Recommendations

Info

Stand the pedalboard up (an assistant is helpful) and face the underside. Locate the area under the end of the spring and apply the pad at a 90° angle with equal parts distributed toward wall and floor. This should take care of the problem. (I cannot tell you how grateful I am to Rob Stefanussen of the Hauptwerk forum for providing me with this solution.) 30
Setting up Hauptwerk First start Hauptwerk (Stand Alone) and install your first sample set with the menu item File/Install organ, sample set, temperament, or impulse response. Follow the instructions that came with your sample set. Then go to Organ/Load Organ, find the instrument you just installed in the list and double-click it. (If you are using the sample set that comes with Hauptwerk, St. Anne Moseley, find it in the list and double click it.) You will now see this screen. If you have enough memory for the sample sets that you want to load, and the Audio enabled? Field says “Yes” for each rank (click on each rank on the left to check), you will be able to leave this page along and click “OK.” Even though this screen can look complex, it shows the extraordinary flexibility that is available in this program. For Hauptwerkians with a “super system,” some sample sets allow you to load them in 20-bit or 24-bit resolution for better 31
Page 1 and 2: From exploration to completion Haup
Page 3 and 4: The software was originally written
Page 5 and 6: (see this documentation) http://for
Page 7 and 8: to load; large organs in more rever
Page 9 and 10: Now it is time to do your homework
Page 11 and 12: Combination Files You may have an u
Page 13 and 14: The easy way to set up a combinatio
Page 15 and 16: Rocktron switches don’t look like
Page 17 and 18: http://www.randallmullin.com/my_hau
Page 19 and 20: Odds and Ends 1. A friend to help w
Page 21 and 22: Keyboards Set up 4. Open the keyboa
Page 23 and 24: Keyboards Set up (Part B) 8. Attach
Page 25 and 26: Click on a note on the top keyboard
Page 27 and 28: Click on the pistons one by one and
Page 29: and turn on several pedal stops of
Page 33 and 34: Next go to the General Settings/Gen
Page 35 and 36: a list of channels and ports, and t
Page 37 and 38: Message sent when engaging is: Even
Page 39 and 40: Do your midi keyboards match up wit
Page 41 and 42: want your Hauptwerk sample set to t
Page 43 and 44: icons on your desktop when it is in
Page 45 and 46: 7. When Hauptwerk is not loaded, co
Page 47 and 48: Appendix Expression (11) or Volume

Hauptwerk Experience2 - Randall Mullin Website

Create successful ePaper yourself

Delete template?

Save as template?