MDS INSTALLATION AND CONFIGURATION

More documents

Recommendations

Info

3 mdsconfig Utility MDS Commands 62 MDS and CMA Command Line Options MDS AND CMA COMMAND LINE OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . This section provides basic command line options for administering the MDS and CMAs. All command line options must be performed in the C shell and in the directory specified in the description. The mdsconfig utility executes automatically during the initial installation of any MDS. This utility is used to setup the MDS parameters and assign basic configuration details, such as GUI Clients, Administrator rights, etc. If reconfiguration is necessary, the mdsconfig utility can be run from the MDS environment. — mdsenv The mdsenv command sets the environment variable for the MDS. Once the MDS environment is set, all MDS specific commands can be executed. — mdsstart [-m] The mdsstart command starts the MDS and all CMAs loaded on the MDS. If the command is run with the -m qualifier, the MDS is started but the CMAs are not. — mdsstop [-m] The mdsstop command stops the MDS and all CMAs loaded on the MDS. If the command is run with the -m qualifier, the MDS is stopped but the CMAs are not. — mdscmd The mdscmd is a CPMI client that allows an Administrator to add or remove a customer or to use the mirror option to back up MDS information. This utility walks the administrator through the addition or removal of customers from the MDS and all mdscmd commands are logged and synchronized with other MDS machines. — mdsstat The mdsstat command utility displays detailed information on the process status of both the MDS and CMAs.
— cplic printlic MDS and CMA Command Line Options The cplic printlic command displays all MDS licenses. — cplic putlic . . . . . The cplic putlic command allows Administrators to add licenses to the MDS. — fw mds ver The fw mds ver command displays the version information of the MDS DLL. — MSP_RETRY_INTERVAL [Number of seconds] The MSP_RETRY_INTERVAL command changes the MDS setting that regulates how often it looks to see if a GUI client is connected to a CMA. — MSP_RETRY_INIT_INTERVAL [Number of seconds] The MSP_RETRY_INIT_INTERVAL command changes the MDS setting that regulates how often it requests that the CMAs send status information to the MDS. — MSP_SPACING_REG_CMAS_FOR_STATUSES Customer Management Add-on Commands — mdsenv [CMA name] The MSP_SPACING_REG_CMAS_FOR_STATUSES command initiates the MDS to contact the CMAs with a request to start collecting status information. If there is no MDG connection to the MDS, it will not initiate a status collection request to the CMAs. The above command forces the request to each CMA in one-second intervals. The mdsenv command sets the environment variable for the specified CMA. Once the CMA environment is set, all CMA specific commands can be executed. This command must be repeated, referencing the appropriate CMA, if the user intends to execute commands for a different CMA. All CMA specific commands can only take place once the correct environment variable has been set. — fw ver The fw ver command displays the VPN-1/FireWall-1 version information for the CMA for which the environment is set. 63
Page 1 and 2: MDS INSTALLATION AND CONFIGURATION
Page 7 and 8: Lab 1: Installing and Configuring t
Page 21: CMA Management . . . . . CMA MANAGE
Page 25 and 26: Summary Review Questions Review . .

MDS INSTALLATION AND CONFIGURATION

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?