11.07.2015 Views

TVG420 User Manual 2.2 (SW release 1.2.2)

TVG420 User Manual 2.2 (SW release 1.2.2)

TVG420 User Manual 2.2 (SW release 1.2.2)

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ASI-IP-GTW <strong>User</strong>'s <strong>Manual</strong>oWhere appropriate ensure that this product has an adequate levelof lightning protection. Alternatively, during a lightning storm orwhenever it is left unattended and unused for long periods of time,unplug it from the supply outlet and disconnect the outputequipment. This prevents damage to the product due to lightningand power-line surges.Warning: If the Video Gateway has been subject to a lightning strike orthe power surge which has stopped it working, disconnect the powerimmediately. Do not reapply power until it has been checked for safety.If in doubt, contact Network.<strong>2.2</strong>.2 To fix the equipmentThe ASI-IP-GTW is designed for stationary use. The ASI-IP-GTW isdesigned for installation in standard 19" racks. When installed in arack, ensure that the unit is surely and safely installed and that theequipment has adequate through-flow of air.<strong>2.2</strong>.3 To cable the equipmentEnsure that power supply cables are routed in such a way that they arenot likely to be walked on or pinched by items placed upon or againstthem.Do not run ac power cables and signal cables in the same duct.<strong>2.2</strong>.4 Equipment accessThe ASI-IP-GTW has connectors at the rear. When installing the unit,ensure that the unit is installed to allow easy access to the rear of theunit.<strong>2.2</strong>.5 VentilationWarning: Never push objects of any kind into this equipment throughopenings as they may touch dangerous voltage points or short-outparts that could result in a fire or electric shock. Never spill liquid ofany kind on or into the product.Please observe the following:1. Openings in the cabinet are provided for ventilation and to ensurereliable operation of the product and to protect it from overheating.These openings must not be blocked or covered. This productshould never be placed near or over a radiator or heat register. Thisproduct should not be placed in a built-in installation such as arack unless proper ventilation is provided or the instructions havebeen adhered to.2. The fans contained in this unit are not fitted with dust/insect filter.Play particular attention to the environment in which it is to beused.The ASI-IP-GTW should be installed to allow adequate flow of freeair.Ensure that the ventilation holes on each side of the ASI-IP-Page 16

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!