TVG420 User Manual 2.2 (SW release 1.2.2)

ASI-IP-GTW User's Manual3.7 IP RX3.7.1 MainFigure 20 shows the IP RX page. The purpose of this page is to providean interface for configuring the different streams to be received by theunit.Figure 20. IP RX pageThe left part of screen shows a three containing all the DVB ASIoutputs port. To select a port, click that port. The information to theright of the page is related to the selected port.1.1.1.27 Output ConfigurationEnable output: Tick this box to enable an output. If this is not ticked,you will not send any MPEG-2 transport stream on this ASI output.The output port will be grey in the status view.Packet length: This lets you configure the ASI output to transmit 188or 204 byte transport stream packets. If incoming IP frames contain204 byte MPEG-2 transport stream packets and the packet length is setto 188, the last 16 bytes of the 204 byte packets will be discarded. Ifincoming IP frames contain 188 byte MPEG-2 transport stream packetsand the packet length is set to 204, the last 16 bytes of the 204 bytepackets will contain the hexadecimal value FF.Output name: Enter a name reference to an ASI output stream.Copy of previous port: Every even numbered output includes thisoption. Selecting this option makes the port output exactly the same asthe previous port, and no other IP RX options are used.Page 46