TVG420 User Manual 2.2 (SW release 1.2.2)

ASI-IP-GTW User's Manual1 Introduction1.1 Purpose of this ManualThis manual describes how to operate the ASI to IP Gateway, hereafterreferred to as the ASI-IP-GTW. It also describes how to install andmaintain the unit. A detailed technical description of the functionalityof the unit is given as part of this document.The following topics are covered in this manual:o General introduction to the ASI-IP-GTWo Installation of the Unito Functional description of the Unito Fault finding and maintenance1.1.1 Who Should Use this ManualThis manual is written for operators and users of the ASI-IP-GTW andis meant to provide necessary information for installation, operationand day-to-day maintenance of the unit.Note: This manual does not include any maintenance information orprocedures which require the removal of covers.1.1.2 Warnings, Cautions and Notes1.1.1.1 Heed WarningsAll warnings on the product and in the operating instructions shouldbe adhered to. The manufacturer can not be held responsible forinjuries or damages where warnings and cautions have been ignored ortaken lightly.1.1.1.2 Read InstructionsAll the safety and operating instructions should be read before thisproduct is operated.1.1.1.3 Follow InstructionsAll operating and use instructions should be followed.1.1.1.4 Retain InformationThe safety and operating instructions should be retained for futurereference.Warning: Warnings give information, if strictly observed, will preventpersonal injury and death, or damage to personal property or theenvironment.Page 8