Sym GTS servicemanual - Scootergrisen
Sym GTS servicemanual - Scootergrisen
Sym GTS servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Hold left crank shaft puller, and turn the shaft<br />
puller nut by clutch nut wrench to pull in crank<br />
shaft into left crankcase.<br />
Put wave washer onto right crank bearing.<br />
Caution<br />
Right flank the wave washer piece certainly must<br />
install. Cannot install the wrong position or leak<br />
the attire. Otherwise can cause the motorcycle to<br />
have the fierce vibration<br />
Install 2 dowel pins and new gasket.<br />
Install the right crankcase onto the left crankcase<br />
Tighten 8 bolts on the left crankcase.<br />
Tighten 2 bolts on the left crankcase.<br />
Torque value: 0.8~1.2kgf-m<br />
To this chapter contents<br />
2 bolts<br />
11. Crankcase / Crank<br />
R. crankcase L. crankcase<br />
8 bolts<br />
Crank shaft puller<br />
11-7
Change language