ASSEMBLY & OPERATION MANUAL - Inspire Fitness

STEP 6IMPORTANT!Guide Rods must be2 - 1 ¾” Hex Bolts in Front of plate.4 - 3/8” Flat Washers2 - 3/8” Lock NutsFINGER TIGHTEN ONLYMain UprightSTEP 52 - 4” Hex Bolts4 - 3/8” Flat Washers2 - 3/8” Lock NutsFINGER TIGHTEN ONLYStep 5: Attach Main Upright to Main Base using:Note: Finger Tighten OnlyStep 6: Attach Guide Rods to Main Upright using:Note: Finger Tighten OnlyTwo (3/8” x 4” Hex Bolts)Four (3/8” Flat Washers)Two (3/8” Lock Nuts)Two (3/8” x 1 ¾” Hex Bolts)Four (3/8” Flat Washers)Two (3/8” Lock Nuts)Page 9