ASSEMBLY & OPERATION MANUAL - Inspire Fitness

STEP 342 – 1 ¾” Hex Bolts4 – 3/8” Flat Washers2 – 3/8” Lock NutsNote: Be sure guide rods are positionedin front of plate.Shroud Plate AssemblySTEP 351 – 2 ½” Hex Bolt2 – 3/8” Flat Washers1 – 3/8” Lock NutStep 34: Secure Guide Rods and Shroud Plate Assembly Two (3/8”x1 ¾” Hex Bolts)to Main Upright using:Four (3/8” Flat Washers)Two (3/8” Lock Nuts)Step 35: Secure Bottom Shroud Plate to Rear Base using: One (3/8”x2 ½” Hex Bolt)Two (3/8” Flat Washers)Note: If heavy stack has been installed, bolt in step One (3/8” Lock Nut)35 must be installed from the bottom.Note: Tighten bolts in Steps 34, 35 and Steps 3, 5, 7, and 17 now.Page 22