ASSEMBLY & OPERATION MANUAL - Inspire Fitness

STEP 201 – Plastic Ball1 – Cable “U” Bracket1 – 1 ¼ “ Shoulder Bolt1 – Spring Clip1 – 5/16” Lock NutSTEP 221 – Plastic Ball1 – Cable “U” Bracket1 – 1 ¼ “ Shoulder Bolt1 – Spring Clip1 – 5/16” Lock NutSTEP 21Route Lower CablePulley 10Cable Retainer PinStep 20: Assemble Cable End as donein step 16 using:Wrench Tighten NowOne (Plastic Ball)One (Cable “U” Bracket)One (1 ¼” Shoulder Bolt)One (Spring Clip)One (5/16” Lock Nut)Step 21: Route Lower Cable from top to bottomNOTE: Make sure cable is routed between pulley 10 and cable retainer pin.Step 22: Assemble Cable End as donein step 16 using:Wrench Tighten NowOne (Plastic Ball)One (Cable “U” Bracket)One (1 ¼” Shoulder Bolt)One (Spring Clip)One (5/16” Lock Nut)Page 17