ASSEMBLY & OPERATION MANUAL - Inspire Fitness

Press Arm BearingsUse Small OD Washers on theOutside of the Press Arm BearingsSTEP 9STEP 82 – ½” Button Head Bolts2 – 3/8” Flat Washers4 – 1” Hex Bolts4 – 3/8” Small ODWashers4 – 3/8” Flat Washers4 – 3/8” Lock NutsPress Arm MountStep 8: Attach Press Arm Bearings to Top Beam Plates using:Note: Finger Tighten OnlyFour (1" Hex Bolts)Four (3/8” Small OD Washers)Four (3/8” Flat Washers)Four (3/8” Lock Nuts)Step 9: Attach Press Arm Mount to Press Arm Bearings Using:Note: Finger Tighten OnlyTwo (1/2” Button Head Bolts)Two (3/8” Flat Washers)Page 11