FX3U-ENET-L USER'S MANUAL - Automation Systems and Controls

The Manual's Usage and StructureHow to use this manualIn this manual, explanations are given for each application of the Ethernet modules(FX3U-ENET-L).Please use this manual using the following key items below as a reference.(1) Features and utility lists(a)(b)Features and functions• Chapter 1 describes the features of the Ethernet modules.• Chapter 3 describes the common functions and specifications of theEthernet modules.Items included in this package and network configured items• Section 2.2 describes the system configuration of the Ethernet module.Parts and components other than those packaged with the module mustbe purchased separately by the user.(2) Processing required prior to starting the operation of the Ethernetmodule(a)(b)(c)(d)(e)Startup procedure• Section 4.2 describes an outline of the procedures to do before starting theoperation of the Ethernet module.Connection to the Ethernet network.• Section 2.2 describes the devices required to connect to the Ethernetnetwork.• Section 4.4 describes the connection methods for each type of interface.Parameter settings required before starting Ethernet module operation• Section 3.6 describes the parameter settings required in order to use eachfunction.Confirm the required parameters, set them according to the relevantsection, and save the setting values in the PLC to which the Ethernetmodule is installed.• Section 4.5 describes the types of Ethernet parameter setting in order touse the Ethernet module.Checking for Ethernet module failures• Section 4.7 describes the self-diagnostic test for the Ethernet module.Checking for connection errors with the external devices• Subsection 5.4.1 describes how to check for connection errors using the"PING" command.• Subsection 5.4.2 describes how to check for connection errors byperforming the loopback test through MC protocol-based communication.A - 12 A - 12