FX3U-ENET-L USER'S MANUAL - Automation Systems and Controls

3SPECIFICATIONSMELSEC-FBFM numberDecimal(Hexadecimal)Attribute Application NameFlash ROM writing control0000H: Normal status(Continued from the previous page)Initial valueDecimal(Hexadecimal)FlashROMsaveReferencesection25(19H)R/WFlash ROMcontrolFlash ROMwriting controlarea9872H: Write command for configuration datato a flash ROM.Automatically returns to 0000H afterwriting to a flash ROM9981H: Write command for configuration datato a flash ROM (return to the status atfactory shipment).Automatically returns to 0000H afterwriting to a flash ROM0(0000H)—Flash ROM writing status26(1AH)R/WFlash ROMwriting status0000H: Initial status9981H: During the flash ROM writing0001H: Flash ROM writing completion0002H: Flash ROM writing error (Flash ROMfault)The status is updated by write command0(0000H)27(1BH)28(1CH)29(1DH)30(1EH)31(1FH)R Initial completionRR/WRModule statusareaError codestorageModel codestorage0000H: Initial incompletion0001H: Initial completion (in conjunction with b0 of BFM#28)Stores Ethernet module statusb0: INIT 1: Initial processing normally completed0: —b1: System bitb2: 100M/10M 1: 100Mbps0: 10Mbps/When not connectedb3: ERR. 1: Setting abnormal display0: Setting normal displayb4: COM.ERR 1: Communication abnormal display0: Communication normal displayb5: 1: Initial processing abnormally completed0: —b6: 1: Open processing abnormally completed0: —b7: 1: Link signal ON 0: Link signal OFFb8: Connection No.1 1: Open 0: Closedb9: Connection No.2 1: Open 0: Closedb10: Connection No.3 1: Open 0: Closedb11: Connection No.4 1: Open 0: Closedb0 and b5 are cleared at re-initialization request.b6 is cleared at open request.Stores the first error code (when the value of this BFM number is0000H)Writing 0000H resets the error.Model code (K7132)0(0000H)0(0000H)0(0000H)7132(1BDCH)Subsection5.2.1Section 4.3Section11.3— System area — — ——3 - 103 - 10