FX3U-ENET-L USER'S MANUAL - Automation Systems and Controls

About the Generic Terms and AbbreviationsThis manual uses the following generic terms and abbreviations to describe theModel FX3U-ENET-L Ethernet interface block.Generic Term/AbbreviationEthernet AddressEthernet moduleEthernet networkGX DeveloperExternal devicePersonal computerMain unitFX Configurator-EN-LDescriptionA machine-specific address that is also referred to as the MAC (Media Access ControlAddress). This is used to identify the addresses of external devices over a network.The Ethernet address of the Ethernet module can be verified on BFM.Abbreviation for the FX3U-ENET-L Ethernet Interface block(Described as the Ethernet module or FX3U-ENET-L in the figures)Abbreviation for 10BASE-T and 100BASE-TX networksAbbreviation for GX Developer (SWnD5C-GPPW-E). (n in the model name is 4 or later)Generic term for personal computers, computers, workstations (WS) and Ethernetmodule etc. that are connected by Ethernet for data communicationGeneric term for an IBM PC/AT (or IBM compatible) personal computerGeneric name for FX Series PLC main unitSoftware for setting the Ethernet module parameters. FX Configurator-EN-L (FX3U-ENET-L Configuration tool) can set the independent startup method, and the startupmethod from the [tool] menu in GX Developer.A - 14 A - 14