Manual - Edimax

2-4-4 Using ‘PPTP xDSL’ as broadband connection typeIf your ISP requires you to use PPTP (Point-to-Point Tunneling Protocol)to establish connection, you can select this connection type to establishInternet connection.PPTP xDSL requires two kinds of setting: WAN interface setting (setupIP address) and PPTP setting (PPTP user name and password). Here westart from WAN interface setting first:Select the type of how you obtain IP address from your service providerhere. You can choose ‘Obtain an IP address automatically’ (equal toDHCP, please refer to ‘Cable Modem’ section above), or ‘Use thefollowing IP address’ (i.e. static IP address).WAN interface settings must be correctly set, or the Internet connectionwill fail even those settings of PPTP settings are correct. Please contactyour Internet service provider if you don’t know what you should fill inthese fields.