Infader manual.pdf - Red Sound Systems

THE MODULEDisconnect plug from socketHIGHMIDJ8LOWTo remove the complete crossfader assembly, simply un-screw the four front panel screws situated on either side ofthe crossfaders, as shown in the following diagram:REDDIGITAL DJ MIXING SYSTEMHIGHHIGHTRI-FADER MODULEMIDMIDREVERSELOW(MASTER)LOWREVERSEMASTERSPLITX1X3X-FADER MODETRI - FADERSNORMALCENTRE OFF(Patent Pending)X-FADER STATUSSPLIT CUE EQ CUT LEVEL SELECT PHONESHold the back of the crossfader assembly to support it as the last screws are removed. Gently bring away thecrossfader panel, angling it slightly to clear the main PCB and taking care not to damage the PCB or associatedcomponents when the metal support frame clears the aperture, as shown below:Support whilst removingthe last screwsDust guardHold the crossfader assembly with the metal support bracket uppermost, lift-off the black dust guard and thenremove the six fader fixing screws, keeping them all in a safe place ready for re-assembly, as shown in thefollowing diagrams:InFader - Digital DJ Mixing Desk22