Third Party Inspection Guidelines for Inspectors Technical ... - Dryvit

More documents

Recommendations

Info

Third Party Inspections Guidelines for CARE InspectorsSECTION TWO (Cont'd)3. Scope of Necessary EIFS Repairs3.1. Clean the EIFS Surface3.2. Acrylic recoat3.3. Crack repair and elastomeric recoatdryvitCARE INSPECTION REPORTEXISTING CONDITIONS SURVEY3.4. Crack repair with reinforced base coat andfinish3.5. Remove and replace with new EIFS3.6. Other (describe)
Third Party Inspection Guidelines for CARE InspectorsSECTION THREEdryvitCARE Site Inspection Checklist WorksheetThis section should be completed each time the CARE inspector visits the project site. Attachto Section Two at the completion of each visit.A. Weather1. Temperature at: AMPM2. Weather condition (clear, cloudy, rain, etc.):3. 24-hour forecast:4. Wind/speed:5. Notes:B. Materials and Storage Applicable N/A1. All materials stored under cover andprotected from weather2. When outside storage is requireda. Materials stacked off the groundb. Protected from weatherc. Temperature in storage area greater than4 °C (40 °F) and less than 32 °C (90 °F)3. Insulation boarda. Stored under coverb. Stacked flatc. Not exposed to direct sunlightYES NO N/A
Page 1 and 2: Third Party Inspection Guidelines F
Page 3 and 4: Third Party Inspection Guidelines f
Page 5: Third Party Inspection Guidelines f
Page 21: Third Party Inspection Guidelines f

Third Party Inspection Guidelines for Inspectors Technical ... - Dryvit

Create successful ePaper yourself

Delete template?

Save as template?