LifeSize Icon 600 Video System Guide - TeleSwitch

LifeSize Icon Video System Guide 4System Access and PasswordsRemote control Select > and enter the passcode (by default, 1234) to access a limited set ofadministrator functions from the video system’s display:Reset network settings.Reset all settings.Revert to the alternate software version and reset all settings to their default values.BrowserSSHLifeSizeUVC ManagerOpen a web browser and enter the IP address of the LifeSize system. Log in with administratorcredentials The default username and password are admin.The IP address of the system appears in on the main screen of the video system’s display.By default, remote management of a LifeSize video system over HTTP is enabled atPreferences > Security > Enable HTTP and JSON Access.CAUTION: Disabling HTTP logs you out and prevents you from logging back in to the system.Log in with administrator credentials in an SSH session and enter commands to manage yourLifeSize system remotely. The default username and password are admin.By default, remote management over SSH is enabled at Preferences > Security > EnableSSH Access.CAUTION: Disabling SSH prevents you from managing the system remotely over SSH.Read more at Controlling Your LifeSize Icon Video System Through SSH.With LifeSize UVC Manager, administrators can manage your LifeSize video system and othervideo systems across the enterprise.Access your video system from a web browser and navigate to Preferences > Passwords to managepasswords:User Access Username Default PasswordAdministrator Browser, SSH admin adminRemote control through the video system’s display none 1234Support Browser, SSH support supportPasswords can be up to 16 characters in length and contain any combination of the numbers 0-9, theletters a-z and A-Z, and the symbols * (star) and # (pound). The passcode must be one to 32 characters inlength and contain any combination of the numerals 0-9.