MIC-3358 User's Manual - ECA Services Ltd

4.1.2 Standard CMOS SetupThe items in Standard CMOS Setup Menu are divided into 11 categories.Each category includes no, one or more than one setup items. Use thearrow keys to highlight the item and then use the or keys to select the value you want in each item.Figure 4.2: Standard CMOS setup screen.Primary Master/Primary Slave/Secondary Master/Secondary SlavePress PgUp/ or PgDn/ to select Manual, None, Auto type. Notethat the specifications of your drive must match with the drive table. Thehard disk will not work properly if you enter improper information forthis category. If your hard disk drive type is not matched or listed, youcan use Manual to define your own drive type manually. If you selectManual, related information is asked to be entered to the following items.Enter the information directly from the keyboard. This informationshould be provided in the documentation from your hard disk vendor orthe system manufacturer.4.1.3 Advance BIOS Features SetupThe "Advance BIOS FEATURES" screen will appear after the BIOSFEATURES SETUP item from the CMOS SETUP UTILITY Menu waschosen. This screen allows the user to configure the board according tohis particular requirements. Below are some major items that are providedin the BIOS FEATURES SETUP screen:51 Chapter 4