12.07.2015 Views

Intrusion Management Installation and User Guide - G4S Technology

Intrusion Management Installation and User Guide - G4S Technology

Intrusion Management Installation and User Guide - G4S Technology

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Configuring the SMS SoftwareNote: The SMS software uses the "Unknown Transaction" alarm/event if it receives a message that has anunknown event code.Table 2: SIA/Contact ID Event Codes of SMS Alarm/EventsEventCodeSMS Message Name100 Medical101 Pendant Transmitter102 Fail to report in110 Fire111 Smoke w/Verification112 Combustion113 Waterflow114 Heat115 Pull Station116 Duct117 Flame118 Near Alarm120 Panic Alarm121 Duress122 Silent123 Audible124 Duress-Access Granted125 Duress-Egress Granted130 Burglary131 Perimeter132 Interior133 24 HR Burg (Aux)134 Entry/Exit135 Day/Night136 Outdoor137 Tamper138 Near Alarm139 <strong>Intrusion</strong> Verifier140 General Alarm141 Polling Loop Open142 Polling Loop Short (AL)143 Expansion Mod Failure144 Sensor Tamper145 Expansion ModuleTamper146 Silent Burg150 24 Hour (Auxiliary)151 Gas Detected152 Refrigeration153 Loss of Heat154 Water Leakage155 Foil Break156 Day Trouble157 Low Bottled Gas Level158 High Temp159 Low Temp161 Loss of Air Flow162 Carbon MonoxideDetected163 Tank Level200 Fire SupervisoryEventCodeSMS Message Name201 Low Water Pressure202 Low CO2203 Gate Valve Sensor204 Low Water Level205 Pump Activated206 Pump Failure300 System Trouble301 AC Loss302 Low System Batt303 RAM Checksum Bad304 ROM Checksum Bad305 System Reset306 Panel Prog Change307 Self-Test Failure308 System Shutdown309 Battery Test Fail310 Ground Fault311 Battery Missing312 Power Supply Overcurrent313 Engineer Reset320 Sounder/Relay321 BELL 1322 BELL 2323 Alarm Relay324 Trouble Relay325 Reversing Relay326 Notification ApplianceCKT. #3327 Notification ApplianceCKT. #4330 System Peripheral331 Polling Loop Open332 Polling Loop Short333 Exp. Module Failure334 Repeater Failure335 Local Printer Paper Out336 Local Printer Failure337 Exp. Mod. DC Loss338 Exp. Mod. Low bat339 Exp. Mod. Reset341 Exp. Mod. Tamper342 Exp. Module AC Loss343 Exp. Module Self Test Fail344 RF Rcvr Jam Detect #350 Communication351 Telco 1 Fault352 Telco 2 Fault353 LR Radio Xmitter Fault354 Failure To Communicate355 Loss of Radion Super.356 Loss of Central PollingEventCodeSMS Message Name357 LRR XMTR. VSWR370 Protection Loop371 Protection Loop Open372 Protection Loop Short373 Fire Trouble374 Exit Error (By <strong>User</strong>)375 Panic Zone Trouble376 Hold-Up Zone Trouble380 Sensor TRBL-Global381 Loss Of Supervision - RFZone382 Loss Of Supervision -RPM Zone383 Sensor Tamper384 RF Low Battery385 Smoke Hi Sens.386 Smoke lo sens.387 <strong>Intrusion</strong> hi sens.388 <strong>Intrusion</strong> lo sens.389 Det. Self test fail391 Sensor Watch Failure392 Drift Comp. Error393 Maintenance Alert400 Open/Close401 Open/Close By <strong>User</strong>402 Group O/C403 Automatic Open/Close404 Late to O/C405 Deferred O/C406 Cancel (By <strong>User</strong>)407 Remote Arm/Disarm408 Quick Arm409 Keyswitch Open/Close441 Armed Stay442 Keyswitch Armed Stay450 Exception O/C451 Early O/C452 Late O/C453 Failed to Open454 Failed to Close455 Auto-Arm Failed456 Partial Arm457 Exit Error (<strong>User</strong>)458 <strong>User</strong> on Premises459 Recent Close461 Wrong Code Entry462 Legal Code Entry463 Re-arm after Alarm464 Auto Arm Time Extended465 Panic Alarm Reset411 Callback Requested36 <strong>Intrusion</strong> <strong>Management</strong> <strong>Installation</strong> <strong>and</strong> <strong>User</strong> <strong>Guide</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!