Shangri-La Manual - Qvis Security

More documents

Recommendations

Info

3.5.4 Alarm outputPlease check current channel status: “o” means it is not in alarming status, “•”means it is in alarming status.You can use desktop shortcut menu or click [main menu]> [alarm function]>[alarm output] to enter the alarm output interface.Picture 3.9 alarm output(Configuration) Alarm is on according to the configuration.(<strong>Manual</strong>) Click the all button and the according channel is alarming no matterthe channel in any state.(Stop) Click the stop button and the according channel stops alarming no matterthe channel in any state.3.5.5 PTZ controlThe PTZ Operation interface is as followed. The functions include: PTZ directioncontrol, step, zoom, focus, iris, setup operation, patrol between spots, trail patrol,boundary scan, assistant switch, light switch, level rotation and so on.Note:1). Decoder A(B) line connects with the DVR A (B) line. The connection is right.2). Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.3). The PTZ functions are decided by the PTZ protocols.Picture 3.10 PTZ setup20
Speed: Set the PTZ rotation range. Default range: 1 ~ 8.Zoom: Click / button to adjust the zoom multiple of the camera.Focus: Click / button to adjust the focus of the camera .Iris: Click / button to adjust the iris of the camera.Direction control: Control the PTZ rotation. 8 directions control is supportive.(4 directions in Front panel is supported )High speed PTZ: Full-screen shows channel image. Left mouse click to controlthe PTZ rotation and orientation. Left click mouse and then rotate the mouse toadjust the zoom multiple of the camera.Set: Enters the function operation menu.Page switch: Switchs between different pages.Special functions:1). PresetTo set a preset location, call up the preset points and the PTZ will automaticallyturn to the setting position1). Preset optionTo set a location for the preset, the procedure is as follows:Step 1: In Picture 3.10, use the direction button to turn the PTZ to the presetposition, click the Settings button to enter Picture 3.11.Step 2: Click on the preset button and then enter the preset point number inthe preset box (shows 0 in box below),Step 3: Click the Set button to return to Picture 3.10 to complete the setup,check that the preset points and preset position corresponds.Clear Preset: Input preset points, click Remove button to remove a preset.Preset ButtonPreset pointinput blankPicture 3.11 Preset Settings2). To go to a Preset PointIn Picture 3.10, click Page Switch button, enter PTZ control interface as shown inPicture 3.12. In the input No, type the preset point, then click the preset button,the PTZ will turn to the corresponding preset point.21
Page 1 and 2: SHANGRI LA1 U8 - 16 ChannelDVRUser
Page 4 and 5: 4.4 System ........................
Page 6 and 7: JOURNAL OF PETROLOGY VOLUME 52 NUMB
Page 8 and 9: Front panel function tableSerial NO
Page 10 and 11: 2.5 Audio and video input and outpu
Page 12 and 13: 5. Alarm input type unlimitedThe DV
Page 15 and 16: Picture 3.1 System LoginPassword pr
Page 17 and 18: 3.5.2 PlaybackThere are two methods
Page 19: Button Function Button Function/ Pl
Page 23 and 24: 3: ScanThe PTZ can also work on the
Page 25 and 26: Picture 3.18 Color Setting3.5.7 Out
Page 27 and 28: Main menu Sub menu FunctionSystemin
Page 29 and 30: 4.2.3 PlaybackRefer to chapter 3.5.
Page 31 and 32: Picture 4.6 set the time section(In
Page 33 and 34: 4.3.4 Alarm inputWhen the system ge
Page 35 and 36: 4.4.2 Encode setupSet the video/aud
Page 37 and 38: (PPPoE setup)Picture 4.19 PPPOEInpu
Page 39 and 40: (DDNS) (dynamic domain name server)
Page 41 and 42: (Enable) Select this to make sure t
Page 43 and 44: 4.4.6 PTZ setupPicture 4.29 PTZ set
Page 45 and 46: 4.5.2 AccountManage the user purvie
Page 47 and 48: 4.5.3 Online UserLook up the networ
Page 49 and 50: X means that the hard disk is not w
Page 51 and 52: 5 FAQ and maintenance5.1 FAQIf your
Page 53 and 54: 11). The DVR can not control the PT
Page 55 and 56: 21). The storage time is not enough
Page 57 and 58: Appendix 3.Technique parametersType

Shangri-La Manual - Qvis Security

Create successful ePaper yourself

Delete template?

Save as template?