Shangri-La Manual - Qvis Security

More documents

Recommendations

Info

(Period) Set the time section for common recording, The recording will start onlywithin the set range.(Record type) Set recording type: regular, detection or alarm.Regular: Perform regular recording in the set time section. The video file type is“R”.Detect: Trigger the “motion detect”, “camera mask” or “video loss” signal. Whenthe above alarm is set as the opening recording, the “detection recording” stateis on. The video file type is “M”.Alarm: This triggers the external alarm signal in the set time section. When theabove alarm is set as the opening recording, the “detection recording” state is setto on. The video file type is “A”.Note: Refer to chapter 4.3 to set corresponding alarm function.4.2.2 Snapshot StorageSetup snapshot parameters for different channels.At first time it's set for 24hourssnapshot continuously, pls go to Main Menu->Record->Snapshot Storage forappropriate settings.Note: If normal snapshot storage,pls setup Snap at Main Menu->Advanced->Snapshot (pls refer to chapter 4.5.1 HDD Manage)Picture 4.2(Channel) Select the related channel to set,click "all" to set all channels.(Presnap) Setup presnap picture quantity before recording, default is 5 pieces.(Record) Set record status,"Schedule","<strong>Manual</strong>" and "Stop"Schedule: Will take a snapshot according to the record type setting (regular,detect and alarm) and time setting period.<strong>Manual</strong>: No matter what the present channel is doing, once you choose the"manual" button, it will only take a snapshot when you tell it to.Stop: No matter what the present channel is in a state, once you choose the"stop" button, it will stop the snapshot function.(Period) Set normal record period, (Sets the frequency that a Snapshot is taken).(Type) Three types: regular, detect and alarm (sets the trigger for a shapshot).(Record type) Three types: regular, detect and alarmRegular: snapshot at set periodDetect: snapshot at set period when motion detect, video blind and video loss areset as the trigger to activate a snapshot.Alarm: snapshot at set period when alarm in which is preset for snapshot enable.Note: for related alarm function, pls refer to chapter 4.3.28
4.2.3 PlaybackRefer to chapter 3.5.2.4.2.4 BackupYou can backup the video files to external storage through setup.Note: The storage must be installed before the file backup. If the backup isterminated, the files already backed up can be played back individually.Picture 4.3 Backup(Detect) Detects the storage connected with the DVR such as hard disk oruniversal disk.(Erase) Choose the file to delete and click erasure to delete the file.(Stop) Stop the backup.(Backup) Click backup button and the dialog box pops up. You can choose thebackup file according to type, channel and time recorded.Picture 4.4 File BackupRemove: Clear the file information.Add: Show the file information to satisfy the set file attributes.Start/pause: Click the play button to start the backup and click the pause buttonto stop the backup.Cancel: During backup you can exit the page layout to carry out other functions.29
Page 1 and 2: SHANGRI LA1 U8 - 16 ChannelDVRUser
Page 4 and 5: 4.4 System ........................
Page 6 and 7: JOURNAL OF PETROLOGY VOLUME 52 NUMB
Page 8 and 9: Front panel function tableSerial NO
Page 10 and 11: 2.5 Audio and video input and outpu
Page 12 and 13: 5. Alarm input type unlimitedThe DV
Page 15 and 16: Picture 3.1 System LoginPassword pr
Page 17 and 18: 3.5.2 PlaybackThere are two methods
Page 19 and 20: Button Function Button Function/ Pl
Page 21 and 22: Speed: Set the PTZ rotation range.
Page 23 and 24: 3: ScanThe PTZ can also work on the
Page 25 and 26: Picture 3.18 Color Setting3.5.7 Out
Page 27: Main menu Sub menu FunctionSystemin
Page 31 and 32: Picture 4.6 set the time section(In
Page 33 and 34: 4.3.4 Alarm inputWhen the system ge
Page 35 and 36: 4.4.2 Encode setupSet the video/aud
Page 37 and 38: (PPPoE setup)Picture 4.19 PPPOEInpu
Page 39 and 40: (DDNS) (dynamic domain name server)
Page 41 and 42: (Enable) Select this to make sure t
Page 43 and 44: 4.4.6 PTZ setupPicture 4.29 PTZ set
Page 45 and 46: 4.5.2 AccountManage the user purvie
Page 47 and 48: 4.5.3 Online UserLook up the networ
Page 49 and 50: X means that the hard disk is not w
Page 51 and 52: 5 FAQ and maintenance5.1 FAQIf your
Page 53 and 54: 11). The DVR can not control the PT
Page 55 and 56: 21). The storage time is not enough
Page 57 and 58: Appendix 3.Technique parametersType

Shangri-La Manual - Qvis Security

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?