<strong>HWS</strong>600P<strong>HWS</strong>600P SpecificationsITEMS/UNITSMODEL <strong>HWS</strong>600P-24 <strong>HWS</strong>600P-36 <strong>HWS</strong>600P-48<strong>HWS</strong> <strong>HWS</strong> HD <strong>HWS</strong> ME <strong>HWS</strong>-PInstruction ManualVoltage Range (*3) V 85 - 265VAC or 120 - 330VDCFrequency Hz 47 - 63Power Factor (100/200VAC)(Typ) (*2) 0.99/0.94InputEfficiency (100VAC)(Typ) (*2) 84Efficiency (200VAC)(Typ) (*2) 87Current (100/200VAC)(Typ) (*2) A 7.2/3.7Inrush Current (100/200VAC)(Typ) (*4) A 20 / 40Leakage Current (*11) mA Less than 0.75 (0.2(Typ) at 100VAC / 0.44(Typ) at 230VAC)Nominal Voltage VDC 24 36 48Average Current A 25 16.7 12.5Maximum Peak Current (100VAC/200VAC) (*1) A 40.5/83 27/55.5 20/41.5Average Power W 600 601.2 600Maximum Peak Power (100VAC) (*1) W 972 960Maximum Peak Power (200VAC) (*1) W 1992 1998 1992Output Maximum Line Regulation (*6) mV 96 144 192Maximum Load Regulation (*7) mV 144 216 288Temperature CoefficientLess than 0.02% / CMaximum Ripple & Noise (0≤Ta≤70C) (*5) mVp-p 150 200 350Maximum Ripple & Noise (-10≤Ta41.3 >27.5 >20.4Over Current Protection (200VAC) (*8) A >84.6 >56.6 >42.3Over Voltage Protection (*9) VDC 27.6 - 32.4 41.4 - 48.6 55.2 - 64.8Remote Sensing -Function Remote ON/OFF ControlPossibleParallel OperationPossible (2 units Max)<strong>Series</strong> OperationPossibleMonitoring SignalPF(Open Collector Output)Line DIPDesigned to meet SEMI-F47 (200VAC Line only)Operating Temperature (*12) -10 - +70 (-10 - +50:100%,+70:50%)Storage Temperature -30 - +85Operating Humidity RH 10 - 90 (No dewdrop)Storage Humidity RH 10 - 95 (No dewdrop)VibrationShock (In package)CoolingWithstand VoltageIsolationIsolation ResistanceEnvironmentStandardsMechanicalAt no operating, 10 - 55Hz (Sweep for 1min) 19.6m/s² Constant, X,Y,Z 1hour eachLess than 196.1m/s²Forced Air By Blower FanInput - FG : 2.5kVAC (20mA), Input - Output : 3kVAC (20mA)Output - FG: 500VAC (100mA), Output-CNT: 100VAC(100mA) for 1minMore than 100M Output - FG : 500VDCMore than 10M Output -CNT : 100VDC at 25C and 70%RHSafety Standards (*13)Approved by UL60950-1, CSA60950-1, EN60950-1, EN50178Designed to meet DENANPFHCDesigned to meet IEC61000-3-2EMI (*14) Designed to meet EN55011/EN55022-B, FCC-B, VCCI-BImmunity Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3), -5(Level 3,4), -6(Level 3), -8(Level 4), -11Weight (Typ) g 1600Size (WHD) mm 100 x 82 x 165 ( Refer to Outline Drawing )*Read instruction manual carefully, before using the power supply unit.=NOTES=(*1) Operating time at peak output is less than 5sec, duty is less than 35%. For details, refer to peak output condition.When the peak output more than 5 sec is continued, the output is shut down, manual reset (CNT reset or Re power on).(*2) At 100/200VAC, Ta=25 and average output power.(*3) For cases where conformance to various safety specs (UL, CSA, EN) are required,to be described as 100 - 240VAC(50/60Hz).(*4) First inrush current. Not applicable for the inrush current to Noise Filter for less than 0.2ms.(*5) Measure with JEITA RC-9131A probe, Bandwidth of scope :100MHz. At average output power.(*6) 85 - 265VAC , constant load.(*7) No load-Average load, constant input voltage.(*8) OCP circuit will shut the output down, manual reset (CNT reset or Re power on).(*9) OVP circuit will shut the output down, manual reset (CNT reset or Re power on).(*10) At 100/200VAC , nominal output voltage and average output current.(*11) Measured by the each measuring method of UL,CSA,EN and DENAN(at 60Hz), Ta=25.(*12) Ratings - Derating at standard mounting. Refer to output derating curve.- Load (%) is percent of average output power or average output current, whichever is greater.(*13) As for DENAN, designed to meet at 100VAC.(*14) At Ta=25 and average output power.
<strong>HWS</strong>600POutline Drawing + + - - Output DeratingSIGNAL CONNECTOR USEDPART DESCRIPTION PART NAME MANUFACTPIN HEADER S8B-PHDSS J.S.T.MATCHING HOUSINGS , PINS & TOOLPART DESCRIPTION PART NAME MANUFACTSOCKET HOUSING PHDR-08VS J.S.T.TERMINAL PINSSPHD-002T-P0.5(AWG2824)SPHD-001T-P0.5(AWG2622)J.S.T.HAND CRIMPINGTOOLYRS-620(SPHD-002T-P0.5)YC-610R(SPHD-001T-P0.5) J.S.T.<strong>HWS</strong> <strong>HWS</strong> HD <strong>HWS</strong> ME <strong>HWS</strong>-P Peak Output ConditonUse this product so that relationship among Duty, average output power (Wm)and peak output power (Wp) satisfy conditions defined by expression below.This product must be used less than average output power of specification (Wavg).Also operating duration at peak output power should be less than 5 sec. Instruction Manual
- Page 2 and 3:
HWSSeriesWIDE SELECTION OF LINE UP
- Page 4 and 5:
HWSSeriesHWS/MEAC/DC Switching powe
- Page 6 and 7:
HWSSpecificationsHWS15 8HWS30 10HWS
- Page 8 and 9:
HWS 15HWS15 Specifications(Read ins
- Page 10 and 11:
HWS 30HWS30 Specifications(Read ins
- Page 12 and 13:
HWS 50HWS50 Specifications(Read ins
- Page 14 and 15:
HWS 80HWS80 Specifications(Read ins
- Page 16 and 17:
HWS 100HWS100 Specifications(Read i
- Page 18 and 19:
HWS 150HWS150 Specifications(Read i
- Page 20 and 21:
HWS 300HWS300 Specifications(Read i
- Page 22 and 23: HWS 600HWS600 Specifications(Read i
- Page 24 and 25: HWS 1000HWS1000 Specifications(Read
- Page 26 and 27: HWS 1500HWS1500 Specifications(Read
- Page 28 and 29: HWS 1800THWS1800T Specifications(Re
- Page 31 and 32: HWS/HD UL60590-1/CSA C22.2 No.6
- Page 33 and 34: HWS30/HDOutline Drawing
- Page 35 and 36: HWS50/HDOutline Drawing =
- Page 37 and 38: HWS100/HDOutline DrawingACCESSORIES
- Page 39 and 40: HWS150/HDOutline Drawing
- Page 41 and 42: HWS300/HDOutline Drawing == NOT
- Page 43 and 44: HWS600/HDOutline Drawing == SIGNA
- Page 45 and 46: HWS1000/HDOutline Drawing
- Page 47 and 48: HWS1500/HDOutline Drawing NOTESA:
- Page 49 and 50: HWS1800T/HDOutline Drawing
- Page 51 and 52: HWS/ME
- Page 53 and 54: HWS30/MEOutline Drawing Output
- Page 55 and 56: HWS50/MEOutline DrawingOutput Derat
- Page 57 and 58: HWS100/MEOutline Drawing
- Page 59 and 60: HWS150/MEOutline Drawing
- Page 61 and 62: HWS300/MEOutline Drawing
- Page 63 and 64: HWS600/MEOutline Drawing == SIGNAL
- Page 65 and 66: ELHWS1000/MEOutline Drawing N (AC
- Page 67: HWS1500/MEOutline Drawing
- Page 70 and 71: HWS300PHWS300P SpecificationsITEMS/
- Page 74 and 75: HWS 15 - 150Block DiagramHWS HWS HD
- Page 76 and 77: HWS 1500, 1800TBlock DiagramHWS HWS
- Page 78 and 79: Instruction ManualHWS HWS HD HWS ME
- Page 80 and 81: HWS 15, 30, 50, 80, 100, 150HWS HWS
- Page 82 and 83: HWS 15, 30, 50, 80, 100, 150HWS HWS
- Page 84 and 85: HWS 15, 30, 50, 80, 100, 150HWS HWS
- Page 86 and 87: HWS 300, 600HWS HWS HD HWS ME HWS-P
- Page 88 and 89: Instruction ManualHWS HWS HD HWS ME
- Page 90 and 91: HWS 300, 600HWS HWS HD HWS ME HWS-P
- Page 92 and 93: HWS 300, 600HWS HWS HD HWS ME HWS-P
- Page 94 and 95: HWS 1000HWS HWS HD HWS ME HWS-P
- Page 96 and 97: HWS 1000HWS HWS HD HWS ME HWS-P
- Page 98 and 99: Instruction ManualHWS HWS HD HWS ME
- Page 100 and 101: HWS 1000HWS HWS HD HWS ME HWS-P
- Page 102 and 103: HWS 1000HWS HWS HD HWS ME HWS-PInst
- Page 104 and 105: HWS 1500HWS 1500 Series Instruction
- Page 106 and 107: HWS 1500HWS HWS HD HWS ME HWS-PInst
- Page 108 and 109: HWS 1500HWS HWS HD HWS ME HWS-PInst
- Page 110 and 111: HWS 1500HWS HWS HD HWS ME HWS-P
- Page 112 and 113: HWS 1500HWS HWS HD HWS ME HWS-P
- Page 114 and 115: HWS 1800THWS HWS HD HWS ME HWS-P
- Page 116 and 117: HWS 1800T HWS HWS HD HWS M
- Page 118 and 119: Instruction ManualHWS HWS HD HWS ME
- Page 120 and 121: HWS 1800THWS HWS HD HWS ME HWS-P
- Page 122 and 123:
HWS 1800THWS HWS HD HWS ME HWS-PIns
- Page 124 and 125:
HWS 300P, 600PHWS300P-600P Series I
- Page 126 and 127:
HWS 300P, 600PHWS HWS HD HWS ME HWS
- Page 128 and 129:
HWS 300P, 600PHWS HWS HD HWS ME HWS
- Page 130 and 131:
HWS 300P, 600PHWS HWS HD HWS ME HWS
- Page 132 and 133:
HWS 300P, 600PHWS HWS HD HWS ME HWS
Change language