Crocus CNV - FTP Directory Listing

Installing and connecting the Crocus CNVCrocus CNV2.4 Installation and connection precautionsESD WARNINGThe circuit boards are sensitive to electrostatic discharges (ESD) and should be handled with care. It isadvisable to ensure an optimal electrical contact between yourself, the working area and a safety groundbefore touching any circuit board. Take special care not to touch any component or connector on thecircuit board.EMC WARNINGEMC compliant installationThe complete Crocus family and the CN4 card nest are fully EMC compliant. Because of the modularstructure of the CN4 card nest, all unused slots (power slots, modem slots and interface slots) have to becovered with the appropriate blanking modules at installation time.To ensure compliance with EMC directive 89/336/EEC, shielded cables or ferrite beads have to be used.The interfaces on the Crocus CNV should only be connected to circuit types as listed below.Connector Interface CircuitRJ45 G.703 interface SELVsubD management SELV12 User manual