Crocus CNV - FTP Directory Listing

Installing and connecting the Crocus CNVCrocus CNV2.6.2 Inserting the modular DTE interface in the Card VersionAt the back of the CN4 card nest, two empty slots are provided in which the desired modular DTEinterface can be inserted without extracting the card from the card nest. The upper interface slot is usedfor converter A and the lower interface slot is used for converter B.To insert the modular DTE interface in the CN4 card nest, proceed as follows:StepAction1 Gently slide the modular DTE interface on the two inner slides into an available slot.The following figure shows this procedure:2 When nearly inserted, press tight.3 Lock both screws.4 When the modular DTE interface is present, connect the application.20 User manual