Mill Standard & Pro Manual - BobCAD-CAM

BobCAD-CAM Version 24 Standard & PRO Mill Getting Started ManualAssigned Tools DialogThe Assigned Tools dialog box permits the user to verify the tool number assignments in the postedprogram before the code is even post processed.Let’s take a closer look at each aspect of this dialog box:Tool Number. This field displays the assigned tool number for each tool that will be output inthe finished NC code.Tool Diameter. This field displays the diameter of each tool, mainly to aid the user in tellingthe tools apart.Tool Type. Displays the type of each tool to aid the user in telling the tools apart.Tool Label. The description of the tool in the list.Number field. This field has no label attached. If the Use automatic tool numbering is notset below, the user may enter a number in this field to change the assigned tool number for theselected tool.Use automatic tool numbering. On by default, this checkbox numbers all tools that will beused in the order that they will appear in the finished program.Renumber Tools. If Use automatic tool numbering above is set, this button will causeBobCAD-CAM to renumber all of the tools in sequential order.OK. Click this to have BobCAD-CAM accept any changes made to this dialog.Cancel. Click this to have BobCAD-CAM discard any changes made and to close this dialog.Help. Display this page.Real Solutions for Global Manufacturing 21