Miller AL4 Series

Miller AL4 SeriesAir CylindersDouble Rod Models1-1/2" to 4" Bore SizesHow to Use Double Rod CylinderDimensioned DrawingsTo determine dimensions for a double rod cylinder,first refer to the desired single rod mounting stylecylinder shown on preceding pages of this catalog.After selecting necessary dimensions from thatdrawing, return to this page and supplement thesingle rod dimensions with those shown on thedrawing and dimension table below. Note that doublerod cylinders have a head (Dim. G) at both ends andthat dimension LG replaces LF and PK replaces P,etc. The double rod dimensions differ from, or arein addition to those for single rod cylinders shownon preceding pages and provide the informationneeded to completely dimension a double rodcylinder.On a double rod cylinder where the two rod endsare different, be sure to clearly state which rodend is to be assembled at which end.ZM + 2 X STROKEYPK + STROKEWFLG + STROKEEEK1MMROD END #1 ROD END #2GGAll dimensions are in inches and apply to standard rod sizes only. For alternate rodsizes, determine all envelope dimensions (within LD dim.) as described above andthen use appropriate rod end dimensions for proper rod size from single rod cylinder.RodAddDia.ADD STROKE2xBoreStrokeMM LG PK SAK XAK SSK SNK SEK XEK ZM1 / 2 5 / 8 4 1 / 8 2 3 / 8 6 1 / 8 6 1 / 8 3 3 / 8 2 1 / 4 6 3 / 8 6 1 / 4 6 1 / 82 5/ 8 41/ 8 23/ 8 61/ 8 61/ 8 33/ 8 21/ 4 63/ 4 67/ 16 61/ 82 1 /2 5/8 4 1 /4 2 3 /8 6 1 /4 6 1 /4 3 1 /2 2 3 /8 7 1 /8 6 11 /16 6 1 /43 1 / 4 1 4 3 / 4 2 5 / 8 7 1 / 4 7 3 / 8 3 3 / 4 2 5 / 8 7 3 / 4 7 5 / 8 7 1 / 24 1 43/ 4 25/ 8 71/ 4 73/ 8 33/ 4 25/ 8 8 73/ 4 71/ 2REPLACES DIMENSION LF P SA XA SS SN SE XE –ON SINGLE RODMOUNTING STYLESALL MTGSTYLES7172 74 77ALL MTGSTYLES16