Miller AL4 Series

Miller AL4 SeriesAir CylindersDouble Rod Models5" to 8" Bore SizesHow to Use Double Rod CylinderDimensioned DrawingsTo determine dimensions for a double rod cylinder,first refer to the desired single rod mounting stylecylinder shown on preceding pages of this catalog.After selecting necessary dimensions from thatdrawing, return to this page and supplement thesingle rod dimensions with those shown on thedrawing and dimension table below. Note that doublerod cylinders have a head (Dim. G) at both ends andthat dimension LG replaces LF and PK replaces P,etc. The double rod dimensions differ from, or arein addition to those for single rod cylinders shownon preceding pages and provide the informationneeded to completely dimension a double rodcylinder.On a double rod cylinder where the two rod endsare different, be sure to clearly state which rodend is to be assembled at which end.ZM + 2 X STROKEYPK + STROKEWFLG + STROKEEEKMMROD END #1ROD END #2GGBoreRodAddDia.ADD STROKE2XStrokeMM LG PK SAK XAK SSK SNK ZM5 1 4 15 / 16 2 13 / 16 7 11 / 16 7 11 / 16 3 9 / 16 2 13 / 16 7 11 / 166 1 3 / 8 5 1 / 2 3 1 / 8 8 1 / 4 8 1 / 2 4 1 / 8 3 1 / 8 8 3 / 48 1 3 /8 5 1 /2 3 1 /4 9 1 /8 8 15 /16 4 1 /8 3 1 /8 8 3 /4REPLACES DIMENSION LF P SA XA SS SN —ON SINGLE RODALL MTGALL MTGMOUNTING STYLES STYLES 71 72 74 STYLESAll dimensions are in inches and apply to standard rod sizes only. Foralternate rod sizes, determine all envelope dimensions (within LD dim.) asdescribed above and then use appropriate rod end dimensions for properrod size from single rod cylinder.34