EMI Catalog - Spectrum Control

D-SubminiaturePart Numbering SystemFiltered ConnectorsOrdering InformationExample: 56-513-012-TI56 - 5 1 3 - 0 12 - TIProductSeries1 = Series 100C.O.B.4 = Series FFerrite5 = Series 500Low Profile6 = Series 600Hi-Density7 = Series 700HighPerformanceFilteredD-SubminiatureConnectors- Standard connectorF-RoHS compliant versionShell SizeSeries 400,Series 100 & 5000 = 9 Contacts1 = 15 Contacts2 = 25 Contacts3 = 37 ContactsSeries 600Hi-Density0 = 15 Contacts1 = 26 Contacts2 = 44 Contacts3 = 62 Contacts4 = 78 ContactsSeries 7000 = 9 Contacts1 = 15 Contacts2 = 25 Contacts3 = 37 Contacts4 = 50 ContactsContact Type/Termination1 = Pin to solder cup2 = Pin to 90° PCB mount3 = Socket to straight PCB mount4 = Socket to 90° PCB mount5 = Pin-socket adapter6 = Socket to solder cup7 = Pin to straight PCB mountStyles available for:Series 400 only 2, 3, 4, 7Series 100 1 thru 7Series 500 only 2, 3, 4 & 7Series 600 only 1, 2, 3, 4, 5Series 700 1 thru 6Note: 1 can be Pin to solder cupor Pin to PCB for Series 700.See charts pages 151-170.LineFiltering0 = Allpositionssame9 = Specialloading(Series600 only)To assist your efforts in selecting the correct Filtered Connector to meet your needs,we have developed a part numbering system. All of the standard products are shownin their respective catalog pages.Part number 56-513-012-TI represents a Series 500 connector with 15 contactsin a socket to straight PCB mount configuration. All connector positions havea capacitance value of 840 pF and there are 4-40 threads on mounting flange.CapacitanceValueSeries 40001 = AlwaysSeries 10002 = 100 pF03 = 220 pF04 = 470 pF05 = 820 pF06 = 1500 pF07 = 5600 pF08 = 50 pF09 = 180 pF10 = 1000 pF11 = 2200 pF12 = 47 nFSeries 50010 = 120 pF11 = 440 pF12 = 840 pF13 = 1000 pF14 = 1500 pFSeries 60015 = 85 pF FT16 = 180 pF FT18 = 1000 pF FT19 = 4000 pF FT20 = InsulatedcontactSeries 700See filter specificationchart onpage 149 andselect part numbersfrom Series 700charts pages151-170.OptionsSee options descriptionson page 172add suffix endingSeries 100_- .120 thru-hole and 15µ" gold (.38um)3G - 30µ" gold (.76um)5G - 50µ" gold (1.27um)SC and Straight PCBsTIB - 4-40 thread on rear of flangeTIF - 4-40 thread on front of flangeMIB - M3 thread on rear of flangeGBL6 - for .062" boards (1.57mm)JS - Jack screwsRight Angles and Adapters_-No GBL attachedGL - includes grounding board lockand 4-40 threadsT-4-40 threadsGB - no board locksJ-jack screwsM-M3 threadGF - GL and jack screwsSeries FHD =Hi-Density(15 socket only)Series 500TI = 4-40 threads on mountingflange (.125" hole if notselected)GBL = Grounded board lockincludes 4-40 threads(available only on 90° PCB)GBLF = Grounded board lockand ferrite slabprovides enhanced LCperformance. (Availableonly on 90° PCB)Series 600 Hi-DensityLI = 4-40 UNC insertsS = Solder dipped tails50G = 50 µ (1.27 µm) goldGBL = Ground board lockSeries 700LI = 4-40 UNC insertsLIM = Metric M3.0 self-locking threadsGB = Metal bracket provides groundconnection, includes 4-40self-locking threads (for right anglemount only)GBL = Grounded board lock(right angle)GBL6 = for .062" boards (straightPCB mount) (1.57mm)GBL9 = for .093" boards (straightPCB mount (2.36mm)50G = 50 µ (1.27 µm) gold platingS = Solder dipped tailsJS = Jackscrew mountingFor option combinations, consult factory.171SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: 814-474-2207 • Fax: 814-474-2208 • Web site: www.spectrumcontrol.comSPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58