EMI Catalog - Spectrum Control

High Current/High VoltageResin Sealed FiltersLow Pass FiltersHigh current filters are ideal for use in high current5 volt logic buss, but also can be used for ±48 VDCtelephone rack buss, high current switch mode powersupplies and DC charging systems. High voltage filtersfind use in high voltage power supplies and applicationsrequiring U.L. Hi-Pot.Features■ Current ratings up to 100 Amps■ Continuous voltage ratings up to1250 VDC/240 VAC (400Hz)■ U.L. 1459 recognized and CSA C22.2 approvedversions available■ Rugged bolt-in style for easy installationInstallation Notesfor Figure 1 & 2 — see below (Figure 3 see page 16)1. Mounting installation torqueMethod A: Mounting in full threaded thru holeMaximum torque: 96 in-lbsMethod B: Mounting w/hardwareMaximum torque: 84 in-lbs2. Terminal installation torqueMaximum torque: 20 in-lbsNote: Use two wrench method to installterminal hardware1-1/2 Imperfect Thds..060 Max., Typ.5/16–24 Unf–2A Thd..250(6.35)ø .062 ± .005(1.58 ± .13)Typ..250(6.35)Min. .250(6.35).250(6.35).250(6.35)Min.Figure 3.500(12.7)Hex.Dimensions in inches (mm)84SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: 814-474-2207 • Fax: 814-474-2208 • Web site: www.spectrumcontrol.comSPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58