EMI Catalog - Spectrum Control

Filtered Connector Performance SpecificationsThe filtered D-subminiature connectors shown inthis catalog have been designed and tested to thefollowing test plan.The information shown can be used as a basisfor your filtered connector specifications. (ContactSpectrum Control for additional details.)TestGroupOrderofTestExaminationof TestTest MethodPost TestRequirements1Visual and MechanicalExamination2Materials, DesignsConstruction andWorkmanshipIn accordance with applicable requirements.I3Physical Dimensionsand Marking4CapacitanceMIL-STD-202Method 305 1 KHz, 1VRMS max. 25°CWIthin specified tolerance.5Dielectric WithstandingVoltageMIL-STD-202Method 301No breakdown or damage.6Insulation ResistanceMIL-STD-202Method 302, test condition at rated voltage5000 megohm minimum.7Insertion LossMIL-STD-220No loadIn accordance with applicable requirements.1Contact Engagementand SeparationMIL-C-24308, Para. 3.5.10Maximum engagement force 18.0 oz., minimumseparation force 0.7 oz.2Mating and Unmating ForceMIL-C-24308, Para. 3.5.4MIL-C-24308, Para. 3.5.4Table IILimits: Shell size 1-5, class G only.3DurabilityMIL-C-24308, Para. 3.5.16, 4.7.18, except 100cyclesMIL-C-24308, Para. 3.5.9Contact resistance at 1 amp. 20 millohms max.II45Thermal ShockSolderabilityMIL-STD-202Method 107, Test condition B, -55°C to +125°CMIL-STD-202; Method 208, RMA-FluxNo evidence of damage.Insulation resistance not less than 2500 megohms.Terminals shall meet solderability requirements.6Moisture ResistanceMIL-STD-202Method 106, less step sevenInsulation resistance not less than 500 megohms.Meet dielectric withstanding voltage requirements.III712Resistance to SolderingHeatVibrationShockMIL-STD-202Method 210, Test condition DMIL-STD-202Method 204, Test condition D, 100 mA, currentMIL-STD-202Method 213.Test Condition G,100 mA, currentInsulation resistance not less than 500 megohms.Meet dielectric withstanding voltage requirements.No interruption of current flow longer than1 microsecond. Insulation resistance greaterthan 5000 megohms.No interruptions of current flow longer than1 microsecond.Contact resistance at 1 amp. 15 millohms max.Capacitance within specified limits.Filtered ConnectorsInsulation resistance greater than 2500 megohms.3Mounting Insertsa. Prevailing torque(locking)b. Installation torque(locking)c. Push-out ForceIFI-100a. 3 inch-pounds max.b. 6 inch-pounds without damagec. 10 pounds axial force without loosening insertIV1 LifeMIL-STD-202Method 108, Test condition D, within 125%of rated voltage at the maximum operatingtemperature.Filter shall meet all initial requirements exceptinsulation resistance shall not be less than 500megohms.SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: 814-474-2207 • Fax: 814-474-2208 • Web site: www.spectrumcontrol.comSPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58201