Socket Sets

14Work-Holding ToolsWork Holding Tools, Cutting Tools and Shop Accessories*Saddle*T-Slot Clamps, Drop Forged Carbon SteelA unique tool for holding down work on all machine tools equipped with slotted tables.Because they are drop forged from Carbon Steel, Armstrong T-Slot Clamps embody strengthfar beyond that required for normal clamping operations. And should any slight spring everoccur under extreme conditions, the drop forged frame will not take a permanent set. It’stherefore safe to predict your Armstrong T-Slot Clamps will outlive the machine tools youintend to use them on. And over the years, they’ll save countless hours of operator set-uptime, paying for themselves many times over. Screw features Armstrong’s patented ball-jointswivel pad-the most secure and permanent system for locking pad to screw. Pad is V-notched to aid clamping of small rounds. T-Slot Clamp body, screw and handle are blackfinish. Each clamp is furnished with one T-Slot Bolt, Washer, and Hex Nut.Product Capacity, T-Slot Bolt Clamping Depth, Weight,Number Inches Size, Inches Inches lbs.79-401 0 to 2-1/4 1/2 x 1-1/2 2 2.2979-403 0 to 3-1/4 5/8 x 2 2-1/4 4.6279-405 0 to 3-1/4 3/4 x 2-1/2 2-1/4 5.00Strap ClampsDesigned for holding down work on all machine tools equipped with slotted tables. AllArmstrong Strap Clamps are drop forged from Carbon Steel and heat treated. Drop forgingimparts the extra strength that allows application of greater clamping force, reducing thepossibility of work slippage. Thus, by equipping every machine tool with a completeassortment of Armstrong Strap Clamps, you will decrease the potential for injury tooperator, damage to work piece and equipment. And the clamps will quickly pay forthemselves in man-hours that would otherwise be wasted by operators searching throughscrap bins for make-shift hold-down devices. Natural Finish. T-Slot Bolts, T-Slot Nuts, HexNuts and Washers used in conjunction with Strap Clamps are available.Universal Adjustable ClampsMax. T-SlotProduct Length, Width, Adjustment, Bolt Size, Weight,Number Inches Inches Inches Inches lbs.79-421 5-1/16 1-5/8 2-1/4 5/8 1.2279-422 8 2-1/8 4 3/4 2.78Universal Adjustable Clamps, Saddle OnlyProduct Weight, Use with,Number lbs. Prod. No.79-424 .20 79-42179-425 .28 79-422Finger ClampsSlot Size Finger SizeProduct Length, Width, Thickness, Width, Length, Dia., Length, Weight,Number Inches Inches Inches Inches Inches Inches Inches lbs.79-446 6 1-3/4 7/8 11/16 1-15/16 5/8 5/8 .9179-448 8 2-1/8 1-1/8 13/16 2-9/16 3/4 3/4 3.1214-1Always wear eye protection when near tools in use.