Socket Sets

More documents

Recommendations

Info

14Shop AccessoriesWork Holding Tools, Cutting Tools and Shop AccessoriesTool Post FittingsDrop forged from Carbon Steel, these Tool Posts have openings punched out but are otherwiseunfinished and are not heat treated.A B C D E F HBody Base Base toProduct Length, Dimensions, In. Dimensions, In. Opening Opening For Use For Use Weight,Number Inches Dia., Length Dia., Length Inches Size, In. with Ring with Wedge lbs.89-401 2-15/16 1-1/32 2 1-7/32 5/16 7/16 1-5/16 x 7/16 89-421 89-441 .5189-403 4-1/16 1-1/4 2-7/8 1-5/8 1/4 1/2 1-15/16 x 19/32 89-423 89-443 1.05Tool Post RingsOutside Inside Edge Radius of For ForProduct Diameter, Diameter, Thickness, Concave, Use with Use with Weight,Number Inches Inches Inches Inches Post Wedge lbs.89-421 2-1/4 1-1/16 3/8 3 89-401 89-441 .3189-423 2-15/16 1-5/16 7/16 2-7/8 89-403 89-443 .60Tool Post WedgesTop Extreme Extreme For ForProduct Length, Width, Width, Thickness, Radius, Use with Use with Weight,Number Inches Inches Inches Inches Inches Post Ring lbs.89-441 2-13/32 13/32 1/2 11/32 3 89-401 89-421 .0789-443 3 9/16 21/32 31/64 2-7/8 89-403 89-423 .1714-13Always wear eye protection when near tools in use.
14NOTES:Work Holding Tools, Cutting Tools and Shop Accessories14-14
Page 2 and 3:
THE PERFORMANCE DIFFERENCEPRODUCT H
Page 4 and 5:
Made in U.S.A.From Forge to FinishY
Page 6 and 7:
The Armstrong Bros. Tool Co. was fo
Page 9 and 10:
1Armstrong Industrial Hand Tools Ma
Page 11 and 12:
Industrial Hand Tool Sets1Set 15-00
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
1NOTES:Master Sets1-34
Page 45 and 46:
2STANDARD SERIESSAFETYFully-recesse
Page 47 and 48:
Industrial Series219 Drawer Triple
Page 49 and 50:
Industrial Series212 Drawer Top Che
Page 51 and 52:
Standard Series2Roller Cabinet / To
Page 53 and 54:
Standard Series212 Drawer Single Ba
Page 55 and 56:
Standard Series210 Drawer Top Chest
Page 57 and 58:
Standard Series26 Drawer Side Cabin
Page 59 and 60:
Cases and Bars2Steel Cases and Tote
Page 61:
2NOTES:Tool Storage2-16
Page 64 and 65:
31/4" DriveSet 15-20053 Pc. 6 Point
Page 66 and 67:
31/4" DriveSocket SetsSet 15-21025
Page 68 and 69:
Page 70 and 71:
31/4" DriveSet 15-24010 Pc. 12 Poin
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
3Socket Sets3/8" DriveSet 15-31057
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
33/8" DriveSet 15-4257 Pc. 3/8" Dri
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
33/8" DriveSet 44-375METRIC6 Pc. 3/
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
31/2" DriveSet 15-6056 Pc. 1/2” D
Page 106 and 107:
31/2" DriveSocket SetsSet 44-500MET
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
31" DriveSet 15-81017 Pc. 12 Point
Page 120 and 121:
STRENGTH & SAFETYRadius corner desi
Page 122 and 123:
41/4" Drive1/4” Drive 12 Point St
Page 124 and 125:
41/4" Drive1/4” Drive 4 or 8 Poin
Page 126 and 127:
41/4" DriveHand Sockets and Drive T
Page 128 and 129:
41/4" Drive1/4” Drive Round Head
Page 130 and 131:
Page 132 and 133:
43/8" Drive3/8” Drive 8 Point Sta
Page 134 and 135:
43/8" Drive3/8” Drive Extra Long
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
43/8" Drive3/8” Drive Teardrop Ra
Page 142 and 143:
43/8" Drive3/8” Drive ExtensionsP
Page 144 and 145:
Page 146 and 147:
41/2" Drive1/2” Drive 8 Point Sta
Page 148 and 149:
41/2" Drive1/2” Drive Extra Long
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
41/2" Drive1/2” Drive Black Oxide
Page 156 and 157:
ASME Specs. B107.3 and B107.10M41/2
Page 158 and 159:
Page 160 and 161:
43/4" Drive3/4” Drive ExtensionsP
Page 162 and 163:
41", 1 1/2” Drive1” Drive Slidi
Page 164 and 165:
PRODUCT RANGEDrive Sizes: 1/4" to 2
Page 166 and 167:
53/8" DriveImpact and Power Sockets
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
51" DriveImpact and Power Sockets,
Page 188 and 189:
51" DriveImpact and Power Sockets,
Page 190 and 191:
51-1/2" DriveImpact and Power Socke
Page 192 and 193:
51-1/2" Drive1-1/2" Drive Impact Un
Page 194 and 195:
5No. 5 Spline DriveImpact and Power
Page 196 and 197:
STRENGTHModified radius corner desi
Page 198 and 199:
6Ratcheting Wrench, ReversibleSet 2
Page 200 and 201:
6Ratcheting Wrench, BoxSet 27-6097
Page 202 and 203:
6Ratcheting Wrench, ReversibleRever
Page 204 and 205:
6Ratcheting Wrench, BoxBox Ratcheti
Page 206 and 207:
6Combination WrenchesSet 25-67511 P
Page 208 and 209:
6Combination WrenchesIndustrial Wre
Page 210 and 211:
6Combination WrenchesSet 52-671METR
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
6Combination WrenchesSet 25-68115 P
Page 218 and 219:
6Combination WrenchesSet 52-677METR
Page 220 and 221:
6Combination WrenchesSet 30-6317 Pc
Page 222 and 223:
6Combination WrenchesSet 25-6028 Pc
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
6Box End WrenchesSet 26-8527 Pc. 12
Page 242 and 243:
6Box End WrenchesSet 27-5706 Pc. 12
Page 244 and 245:
6Box End WrenchesSet 27-6053 Pc. Ra
Page 246 and 247:
6Box End WrenchesIndustrial Wrenche
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
6Open End WrenchesSet 26-28210 Pc.
Page 254 and 255:
6Open End WrenchesSet 26-7309 Pc. F
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
6Open End WrenchesIndustrial Wrench
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
6Ratcheting Flare Nut WrenchesSet 2
Page 268 and 269:
6Adjustable WrenchesSet 28-8503 Pc.
Page 270 and 271:
6Pump WrenchesIndustrial Wrenches a
Page 272 and 273:
6Construction, Striking WrenchesInd
Page 274 and 275:
6Slugging WrenchesIndustrial Wrench
Page 276 and 277:
6Spanner, Check Nut WrenchesAdjusta
Page 278 and 279:
6Pipe ToolsIndustrial Wrenches and
Page 280 and 281:
STRENGTHEnclosed head design seals
Page 282 and 283:
7Micrometer Torque WrenchesArmstron
Page 284 and 285:
7Micrometer Torque Wrenches3/4" Dri
Page 286 and 287:
7Dial Torque Wrenches1/4" Drive Dia
Page 288 and 289:
7Electronic Torque WrenchesIntroduc
Page 290 and 291:
7Electronic Torque WrenchesTorque T
Page 292 and 293:
7Torque MultipliersPlate Reaction T
Page 294 and 295:
SAFETYLarger than average handlelen
Page 296 and 297:
8Screwdriver SetsScrewdrivers and N
Page 298 and 299:
8Screwdriver SetsSet 66-6086 Pc. St
Page 300 and 301:
8Screwdriver SetsSet 66-6128 Pc. (S
Page 302 and 303:
8ScrewdriversScrewdrivers and Nut D
Page 304 and 305:
8ScrewdriversTorx, Round ShankA1 A2
Page 306 and 307:
8Electricians ScrewdriversCabinet T
Page 308 and 309:
8Nut DriversHollow Shaft Nut Driver
Page 310 and 311:
8Offset ScrewdriversOffset, Standar
Page 312 and 313:
SAFETYSpecially designed fastener i
Page 314 and 315:
9Tongue & Groove PliersTongue & Gro
Page 316 and 317:
9Diagonal PliersLong Reach High Lev
Page 318 and 319:
9Chain Nose PliersLong Reach Chain
Page 320 and 321:
9Needle Nose, Specialty PliersNeedl
Page 322 and 323:
9Pliers and SnipsWire Stripping Pli
Page 324 and 325:
9Pliers and SnipsRetaining Ring Pli
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
9Pliers and SnipsWiretwister Pliers
Page 334 and 335:
STRENGTHCutting edges are ground to
Page 336 and 337:
10Punches, Chisels, Pry Bars and Ha
Page 338 and 339:
10Punch SetsPunches, Chisels, Pry B
Page 340 and 341:
10Cold ChiselsPunch and Chisel Hold
Page 342 and 343:
10Pin PunchesPunches, Chisels, Pry
Page 344 and 345:
10Pry BarsSet 70-5794 Pc. Pry Bar S
Page 346 and 347:
10Dead Blow HammersHOT CAST DEAD BL
Page 348 and 349: 10Soft Face Hammers, HammersPunches
Page 350 and 351: 10HammersDouble Face Sledge Hammers
Page 352 and 353: STRENGTHThreads are roll formed for
Page 354 and 355: 11C-ClampsC-Clamps and Lifting Eyes
Page 356 and 357: 11C-ClampsDeep Throat PatternOur mo
Page 358 and 359: 11Lifting Eyes (Eye Bolts)C-Clamps
Page 360 and 361: 11Proper Uses of Forged Lifting Eye
Page 362 and 363: ACCESSAdjustable frame for usewith
Page 364 and 365: 12Miscellaneous ToolsAuto-Return, L
Page 366 and 367: 12Feeler GaugesSet 70-801Combinatio
Page 368 and 369: 12Hacksaws, KnivesFlat Frame Hacksa
Page 370 and 371: 12Multi-Purpose Tools, Knives3” L
Page 372 and 373: STRENGTHForcing screw is recessed t
Page 374 and 375: 13Puller SetsSet 72-498Multi-purpos
Page 376 and 377: 13Puller SetsSet 72-496Blind Hole P
Page 378 and 379: 13Standard Pullers13-Ton Standard J
Page 380 and 381: 13Push, Cone, Specialty PullersSet
Page 382 and 383: 13AccessoriesShaft Protector SetDes
Page 384 and 385: TOOL POSTS WITH TOOL HOLDERSMACHINE
Page 386 and 387: 14Work-Holding ToolsWork Holding To
Page 388 and 389: 14Work-Holding ToolsWork Holding To
Page 390 and 391: 14Cutting ToolsWork Holding Tools,
Page 400 and 401: ALLEN ®HEX KEYS AND SETSHeat treat
Page 402 and 403: 15Ball Plus L KeysBall Plus Long A
Page 404 and 405: 15Ball Plus Screwdriver HandlesBall
Page 406 and 407: 15L KeysShort Arm Sets — In Plast
Page 408 and 409: 15Fold-UpsDURACAST ® Fold-UpsProdu
Page 410 and 411: 15Fold-UpsLong HI-VIS Fold-UpsProd
Page 412 and 413: 15L KeysLong Arm Sets — In Vinyl
Page 414 and 415: 15Loop Handle Keys, PLAS-T-KEYS9" L
Page 416 and 417: 15L KeysHex Key Assortment 56882An
Page 418 and 419: K-D SPECIALTY TOOLSSWIVOIL TM OILFI
Page 420 and 421: 163 Pc. Fan Clutch Wrench Kit Item
Page 422 and 423: 16Universal Overhead Valve Spring C
Page 424 and 425: 16Universal 3-Jaw Oil Filter Wrench
Page 426 and 427: 16Seal Puller Item Number: 3245Use
Page 428 and 429: 16Ignition & Electrical, Brake & Wh
Page 430 and 431: 16Brake Bleeder Tank Item Number: 2
Page 432 and 433: 16Hand Bearing Packer Item Number:
Page 434 and 435: 16CV Joint Boot Clamp Pliers Item N
Page 436 and 437: 16Cooling System Check Kit Item Num
Page 438 and 439: 163 Pc. Heavy Duty Hook and Pick Se
Page 440 and 441: 16SAE Impact Driver Set Item Number
Page 442 and 443: 165 Pc. Twist-Out Socket Set Item N
Page 444 and 445: 1610 Pc. Internal/External Twist Ou
Page 446 and 447: 164 Pc. Outside Micrometer Set Item
Page 448 and 449:
166” Digital Caliper with Large L
Page 450 and 451:
16Rotor/Ball Joint Set with Locking
Page 452 and 453:
16Mini Stand Item Number: 3764Featu
Page 454 and 455:
INDUSTRIAL KEYED CHUCKSPLAIN BEARIN
Page 456 and 457:
17Ball Bearing Chucks• Ball beari
Page 458 and 459:
17Plain Bearing Chucks - Thread Mou
Page 460 and 461:
17Medium Duty Industrial Keyless Ch
Page 462 and 463:
17Drain Chuck• Specifically desig
Page 464 and 465:
AMaster Set ContentsSet 15-001 1192
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
AMaster Set ContentsSet 15-071 78 P
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
BReplacement PartsPipe Wrench Parts
Page 484 and 485:
CWrench Sizing ChartsStandard Wrenc
Page 486 and 487:
CMetric Conversion ChartsMetric Con
Page 488 and 489:
CTorque Conversion ChartsIn the Int
Page 490 and 491:
DMerchandising Display ProgramMerch
Page 492 and 493:
DMerchandising Display Program95-93
Page 494 and 495:
DMerchandising Display ProgramMerch
Page 496 and 497:
DMerchandising Display Program95-94
Page 498 and 499:
EAlphabetical IndexAlphabetical Ind
Page 500 and 501:
EAlphabetical IndexAlphabetical Ind
Page 502 and 503:
F-1Product Number IndexFProduct Num
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
F-11Product Number IndexFProduct Nu
Page 514 and 515:
F-13Product Number IndexFProduct Nu
Page 516 and 517:
FProduct Number IndexProduct Number
Page 518 and 519:
FProduct Number Index3472 .........
Page 520:
Danaher Tool Group11011 McCormick R
show all

Socket Sets

Create successful ePaper yourself

Delete template?

Save as template?