Socket Sets

16Drum Brake Adjusting ToolsAdjusts clearance between brake drum and brake shoe. Fits through slot in backing plate and turnsstar wheel.Item No. Description282 Truck Drum Brake Adjusting Tool—Designed to clear axle housing to reach slot in top ofbacking plate on some trucks.287 Straight Drum Brake Adjusting Tool—Heads fit many drum brakes.295 Offset Drum Brake Adjusting Tool—Heads are offset for hard-to-reach areas on small cars.Disc Brake Piston Tool Item Number: 3163Designed to rotate the parking brake activated piston back into the caliper cylinder when replacingworn pads on vehicles equipped with four wheel disc brakes. This tool will function on most domesticand import vehicles.Caution: Do not use with power tools.GM-Ford Disc Brake Piston Tool Item Number: 3355Tool rotates the piston back on GM and Ford vehicles equipped with rear wheel disc brakes. Fits GMvehicles with 2-1/8" and 1-7/8" pistons and Ford vehicles 1987 to current with rear disc brakes. Use inconjunction with a 3/8" square drive tool or the 3342 Disc Brake Adjusting Fixture.Caution: For intended use only.Disc Brake Lining Wear Gauge Item Number: 2116Measures brake lining remaining on bonded pads in fractions from 1/16" to 5/8" in 1/32" graduations.Check without removing caliper. Patented.Brake & WheelHeavy Duty Brake Pad Separator Item Number: 3525Tool helps to move front disk brake pistons back into position while installing new brake shoes. Workswith most all Disk Brake Systems with single piston caliper. Features heavy duty center screw (1/2-13x5”) and pressure plate for extended use. Use with a 5/16" wrench or socket. Overall length is 5”.16-10