English - Yamaha-Racingparts.com

More documents

Recommendations

Info

2. Spark Plug Set (14B-R465B-70)Parts ListNo. PART No. PART NAME Q’TY REMARKS1 14B-1119C-70 PLUG, SPARK 4 NGK R0465B-10The spark creating portion of this spark plug is of a semi-surface discharge type of shape.TIPSince these spark plugs have a copper gasket, caution is needed during installation onthe following points.1. The tightening torque is 10 – 12 N·m (1.0 – 1.2 kgf·m).2. When not checking the torque, tighten by rotating through 30° after manualtightening in the case of new plugs. When reusing plugs, tighten by rotating through15°.(15˚)New gasket(30˚)Reused– 3 –
3. Head-gasket, Cylinder GasketParts ListNo. PART No. PART NAME Q’TY REMARKS1 14B-11181-70 GASKET, CYLINDER HEAD 1 1 t=0.30 mm2 14B-11181-80 GASKET, CYLINDER HEAD 1 1 t=0.35 mm3 14B-11351-70 GASKET, CYLINDER 1 1 t=0.10 mm4 14B-11351-80 GASKET, CYLINDER 1 1 t=0.15 mmThese parts are used to adjust the squish height and <strong>com</strong>pression ratio.They should be installed in the direction, which enables the punched alpha-numeral “14B” isvisible.The standard head cylinder gasket thickness is 0.40 mm and the cylinder gasket thickness is0.20 mm.GASKET, CYLINDER HEADStamping locationGASKET, CYLINDERStamping location– 4 –
Page 1: ’09 YZF-R1KIT MANUALThe Performan
Page 4 and 5: 1 Engine SpecificationsSpec SB STDi
Page 8 and 9: 4. High-lift CamshaftsParts ListNo.
Page 10 and 11: 6. Air Funnel Set (MGC-021008-00)Pa
Page 12 and 13: 6. Installing the Shaft AssemblyIns
Page 14 and 15: 7. Throttle Body Clamp Set (14B-135
Page 16 and 17: STD3KIT112- 13 -
Page 18 and 19: 10. Slipper Clutch Setting Set (4C8
Page 20 and 21: When installing the kit parts, the
Page 22 and 23: Parts ListNo. PART No. PART NAME Q'
Page 24 and 25: YZF-R1 Mission ratioGEARPLAN Ratio
Page 26 and 27: 12. Mission Maintenance Set (14B-A7
Page 28 and 29: Transmission AssemblyThe seal side
Page 30 and 31: 14. Sprocket Nut Set (4C8-A7463-70)
Page 32 and 33: 7865CrankcaseCrankcase322E/G2411-N-
Page 34 and 35: Rebound Damping Adjustment MethodTu
Page 36 and 37: 18. Front Fork ASSYParts ListNo. PA
Page 38 and 39: 19. Spring Front ForkParts ListNo.
Page 40 and 41: 5. Remove the push rod and fit the
Page 42 and 43: 20. Seat Cushion (13S-24713-70)Part
Page 44 and 45: 22. Rear Spare Wheel ASS’Y (4C8-2
Page 46 and 47: 14124Release side(White)Pull side(B
Page 48 and 49: 974Pull side(Black)5Release side(Wh
Page 50 and 51: 2-3 Installing Electrical Parts26.
Page 52 and 53: Diagnosis Functions• Use of the E
Page 54 and 55: 28. Wire Harness Set (14B-F2590-70)
Page 56 and 57:
NOTICEWhen the oil catcher tank is
Page 58 and 59:
Installing ECU:1. Cut the shaded ar
Page 60 and 61:
• Map select switches Map 1 and M
Page 62 and 63:
NOTICEDo not connect the coupler fo
Page 64 and 65:
30. ACM Set (14B-F1400-70)Parts Lis
Page 66 and 67:
EngineTo be tightened Part No. Part
Page 68 and 69:
EngineNUT, RING XCYLINDERHEADEX. PI
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
ChassisTo be tightened Part No. Par
Page 76 and 77:
Tightening the Cylinder HeadTighten
Page 78 and 79:
- 75 -
Page 80 and 81:
5 YZF-R1 Wiring Diagram- 77 -
show all

English - Yamaha-Racingparts.com

Create successful ePaper yourself

Delete template?

Save as template?