1984-1999 BIG tWINS - S&S Cycle

1984-1999 BIG TWINSS&S ®STANDARD FORGED ROCKER ARMSS&S offers an economical solution for stock rebuilds and mild performance upgrades. S&Sstandard rocker arms are forged from 8620 steel for greater strength than stock forged or cast steelrocker arms. In addition they feature the same 3/4" long rocker shaft bushings that our S&S rollerrocker arms do. Thousands of hours of engine testing have proved them to be superior to othernon-roller rocker arms.FITMENT• 1984-up big twins• Non-roller rocker arms should not be used with cams having a lift greater than .585"FEATURES AND BENEFITS• 3/4" long brass bushings provide 50% more load bearing area than the 1/2" long bushings used instock and other aftermarket rocker armsKIT CONTENTS• 2 front and 2 rear rocker armsS&S® STANDARD FORGED ROCKER ARM KITDescriptionPart No.2 front and 2 rear rocker arms 900-4119ANew rocker arm shafts are recommended for maximum performance and rocker life.MSRP$199.95900-4119A90-4036PERFORMANCEPARTSParts forTwin Cam 96 /103 2007-2012Parts forTwin Cam 88 ®1999-2006Parts forEvolution ®1984-1999Parts forSportster ® & Buell ®1986-2012Parts forVintage Engines1926-1984Parts forX-Wedge®2007-2012S&S® ROCKER ARM SHAFTSDescriptionPart No.Set of 490-4036 (H-D® #17611-83B)Individual90-4006 (H-D® #17611-83B)New rocker arm shafts are recommended for maximum performance and rocker life.MSRP$34.95$10.50Parts forVictory®, Off-road& MetricRacingProductsREPLACEMENT PARTS FOR STANDARD FORGED ROCKER ARMSDescriptionPart No.MSRPFront exhaust or rear intake900-4119FA (H-D® #17375-83A)Rear exhaust or front intake900-4119RA (H-D® #17360-83A)Rocker arm bushing (3/4" long) 90-4014$59.95$59.95$3.3090-4014Tools & ShopSuppliesDealer Services& Promo ItemsWarranty &Company PolicyNOTESNon-roller rocker arms should not be used with cams having a lift greater than .585".New rocker arm shafts are recommended for maximum performance and rocker life.All reference to H-D® part numbers is for identification purposes only. We in no way are implying that any of S&S Cycle’s products are original equipment parts or thatthey are equivalent to the corresponding H-D® part number shown.Visit us at www.sscycle.comOEM Cross ReferenceAppendix & Index3-57