OWNER'S MANUAL - Comfort-Aire

Owner’s Manual Room Air Heat Pump with R-410A Heat Controller, Inc.Installation Instructions1WINDOW REQUIREMENTSThese instructions are for a standarddouble-hung window. You will need tomodify them for other types of windows.The air conditioner can be installedwithout the accordion panels if neededto fit in a narrow window. See thewindow opening dimensions. All supporting parts must be securedto firm wood, masonry or metal.The electrical outlet must be withinreach of the power cord.3REMOVE THE AIR CONDITIONERFROM THE CASERemove the locking screw and lockingA Remove the locking screw and lockingbracket from the lower frame.bracket from the lower frame. Save toreinstall later.Save to reinstall later.Remove the ground screw and save toB Remove the ground screw. Save toreinstall later.reinstall later. min.30" to 38.1"(With accordion panels)26” min.(Without accordion panels)26" min.(Without accordion panels)Remove the ground screwand save to reinstall laterSlide the air conditioner from the case byCgripping the base pan handle and pulling unitforward while bracing the case.2STORM WINDOW REQUIREMENTSA storm window frame will not allow theair conditioner to tilt toward the outside,and will keep it from draining properly.To adjust for this, attach a piece of woodto the stool.WOOD PIECES-WIDTH: 2"LENGTH: Long enough to fit inside thewindow frame.THICKNESS : To determine the thickness,place a piece of wood on the stool tomake it 1/2" higher than the top of thestorm window frame.Attach securely with nails or screwsprovided by the installer.1/2" higherthan frameStormwindowframeStoolWood4PREPARE THE WINDOWCut the window sash seal to the properlength. Peel off the backing and attach theseal to the underside of the window sash.88