12.07.2015 Views

OWNER'S MANUAL - Comfort-Aire

OWNER'S MANUAL - Comfort-Aire

OWNER'S MANUAL - Comfort-Aire

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Owner’s Manual Room Air Heat Pump with R-410A Heat Controller, Inc.WARNINGHIGH TEMPERATURE STRESS HAZARDThis room air conditioner is not meant toprovide unattended cooling or life supportfor persons or animals that are unable toreact to failure of the product.The failure of an unattended air conditionermay result in extreme heat in the conditionedspace causing overheating ordeath of persons or animals.Precautions must be taken to ward off orguard against such an occurrence.UnpackingUnpackingUnpack and visually inspect the unit. Report any damage toUnpack the delivering and visually carrier immediately. inspect the If unit. your Report unit is not any damaged,tothe remove delivering and disgard carrier all immediately. packing materials. Remove On some and models discard allpacking the air conditioner material. front On and/or some models mounting the kit air hardware conditioner may be frontand/orpackedmountingseparately.kit hardware may be packed separately.Record the model, and serial serial and numbers manufacturing of your unit numbers in the space of yourunit provided. in the This space information provided is below. found on This a nameplate information visible found after ona the nameplate front of the visible air conditioner after the has front been of removed. the air conditioner The rated hasbeen voltage, removed. amperage The and rated capacity voltage, for your amperage specific and model capacity can foryour also be specific found on model this nameplate. can also be Read found the warranty on this packaged nameplate.Readwith thetheunit.warrantyRegisterpackagedyour unitwithand keepthe unit.theKeepwarrantytheandwarrantyaandcopyaofcopyyourofsalesyourreceiptsales receiptfor futureforreference.future reference.You mayYoualsomaywant to record in the space provided the date purchased andalso want to record in the space provided the date purchasedthe selling dealer.and the selling dealer.<strong>OWNER'S</strong> PRODUCT IDENTIFICATIONMODEL NUMBERSERIAL NUMBERMANUFACTURING NUMBEROwner's NameAddressCity State Zip/ /Date of PurchaseAuthorized DealerAddressCity State Zip( )Phone NumberWARNINGTo avoid death, personal injury or propertydamage due to electrical shock:• Observe all local codes and ordinances.• Disconnect electrical power to unit before servicing.• Ground appliance properly.• Check with a qualified electrician if you are notsure this appliance is properly grounded.• DO NOT ground to gas line.• DO NOT ground to cold water pipe if pipe isinterrupted by plastic, non-metallic gaskets, orother insulating (non-conducting) materials.• DO NOT modify plug on power cord. If plugdoes not fit electrical outlet, have proper outletinstalled by qualified electrician.• DO NOT have a fuse in the neutral or groundcircuit. A fuse in the neutral or ground circuitcould result in an electrical shock.• DO NOT use an extension cord with this appliance.• DO NOT use an adapter plug with this appliance.• DO NOT pinch power cord.• DO NOT REMOVE warning tag from power cord.Electrical RequirementsGrounding InstructionsThis appliance is equipped with a three-prong grounding plugfor protection against possible shock hazards. If a two-prongwall receptacle is encountered, the customer is required tocontact a qualified electrician and have the two-prong wallreceptacle replaced with a properly grounded three-prongwall receptacle in accordance with the National ElectricalCode.Room air conditioners are designed to operate according torequirements on the nameplate and as shown in Table 1.Fuse or circuit breaker ratings must be according to the fuseinstruction label and as shown in Table 1. Do not plug modelsmarked “Use on Single Outlet Circuit Only” into a circuit withanother appliance or light fixture.Receptacle WiringReceptacle wiring must be of adequate size for unit. Referto unit identification plate for exact power requirements.Minimum size of wiring, based on power requirements, is:Units up to 20 amps: 12 gauge20–30 amp units: 10 gaugeLCDI or AFCI Power CordsUnderwriters Laboratories (UL) and the National ElectricCode (NEC) now require power cords that sense currentleakage and be can able open to open the the electrical circuit to to the the unit. In the22

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!