MT-SICS - Mettler Toledo

More documents

Recommendations

Info

SISend weight value immediatelyCommand SI Send the current weight value, irrespective ofbalance stabilityResponseS/S/WeightValue/UnitStable weight valueS/D/WeightValue/UnitNonstable (dynamic) weight valueExampleCommand SI Send current weight valueResponseS/D//////////////2.907/gCommentFor details see Reference manual 705184.The current weight value is unstable (dynamic) andis 2.907 g18 METTLER TOLEDO MT-SICS HB43 Reference Manual
SIRSend weight value immediately and repeatCommand SIR Send the weight values repeatedly, irrespective ofbalance stabilityResponseS/S/WeightValue/UnitStable weight valueS/D/WeightValue/UnitNonstable (dynamic) weight valueExampleCommand SIR Send current weight values at intervalsResponse S/D//////////////2.907/gS/D//////////////2.850/gS/S//////////////2.797/gS/S//////////////2.775/gS/D//////////////2.770/g... The Halogen Moisture Analyzer sends stable ornonstable weight values at intervals of 150 msCommentFor details see Reference manual 705184.ZZeroCommand Z Zero the Halogen Moisture AnalyzerResponse Z/A Zero setting performed, i.e. stability criterion andzero setting range complied withZ/ICommand not executable as the Moisture Analyzeris not in the relevant instrument status (e.g. dryingunit open)ExampleCommand Z ZeroResponse Z/A Zero setting performedComments• This command is equivalent to pressing the # key.• For details see Reference manual 705184.METTLER TOLEDO MT-SICS HB43 Reference Manual 19
Page 1 and 2: 0…-100Reference Manual forMETTLER
Page 3 and 4: ContentsOverview of all commands 41
Page 5 and 6: Status inquiriesHA20 Inquiry of ins
Page 7 and 8: The commands of MT-SICS level 2 and
Page 9 and 10: 2 Basic information on data interch
Page 11 and 12: 2.2.2 Format of the response withou
Page 13 and 14: 3 Commands and responsesThe Halogen
Page 15 and 16: I1Inquiry of MT-SICS level and MT-S
Page 17: I5SW-Identification numberCommand I
Page 21 and 22: @ResetCommand @ Resets the interfac
Page 23 and 24: DWWeight display (Display show Weig
Page 25 and 26: PWRPower On/OffCommand PWR/x Switch
Page 27 and 28: HA05Start / end dryingCommand HA05/
Page 29 and 30: HA08Request printer recordsCommand
Page 31 and 32: HA23Inquiry of last heating module
Page 33 and 34: HA26Inquiry of drying dataCommand H
Page 35 and 36: HA40Inquiry / setting of languageIn
Page 37 and 38: HA402Protection against change in t
Page 39 and 40: x8 Temperature of level 1 of step d
Page 41 and 42: HA632 Definition of freely selectab
Page 43 and 44: 5 What if…?Tips from actual pract

MT-SICS - Mettler Toledo

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?