MT-SICS - Mettler Toledo

More documents

Recommendations

Info

3.4 Commands and responses MT-SICS level 3 (subset for HalogenMoisture Analyzer HB43)All Halogen Moisture Analyzer specified commands are combined in MT-SICS level 3 forHalogen Moisture Analyzers HR73, HG53 and HB43.HA01Reset application / escapeCommand HA01 Reset application / escapeResponse HA01/A Application resetCommentThis command has the same effect as the Reset key, see operating instructions of theHalogen Moisture Analyzer. It terminates all current commands and activities.HA02Set factory settingsCommand HA02 Set factory setting of the menu and methodparametersResponse HA02/A Mean and method parameters set to factory settingCommentAll menu parameters are reset to factory settings except RS interface settings and language.This command terminates a drying.HA03Switch keypad on/offCommand HA03/x x = 0 Keypad of Halogen Moisture Analyzerswitched offx = 1 Keypad of Halogen Moisture Analyzerswitched on (factory setting)Response HA03/A Command executedHA03/L Command understood, parameter wrong26 METTLER TOLEDO MT-SICS HB43 Reference Manual
HA05Start / end dryingCommand HA05/x x = 0 End drying, possible only in instrumentstatus "drying"x = 1 Start drying, possible only in instrumentstatus "ready for start"Response HA05/A Command executedHA05/I Command not executable as the Moisture Analyzeris not in the relevant instrument statusHA05/L Command understood, parameter wrongCommentTo abort current drying use HA01 (Reset application).HA06Trigger audio signalCommand HA06 Trigger audio signal, e.g. at end of dryingResponse HA06/A Command executedMETTLER TOLEDO MT-SICS HB43 Reference Manual 27
Page 1 and 2: 0…-100Reference Manual forMETTLER
Page 3 and 4: ContentsOverview of all commands 41
Page 5 and 6: Status inquiriesHA20 Inquiry of ins
Page 7 and 8: The commands of MT-SICS level 2 and
Page 9 and 10: 2 Basic information on data interch
Page 11 and 12: 2.2.2 Format of the response withou
Page 13 and 14: 3 Commands and responsesThe Halogen
Page 15 and 16: I1Inquiry of MT-SICS level and MT-S
Page 17 and 18: I5SW-Identification numberCommand I
Page 19 and 20: SIRSend weight value immediately an
Page 21 and 22: @ResetCommand @ Resets the interfac
Page 23 and 24: DWWeight display (Display show Weig
Page 25: PWRPower On/OffCommand PWR/x Switch
Page 29 and 30: HA08Request printer recordsCommand
Page 31 and 32: HA23Inquiry of last heating module
Page 33 and 34: HA26Inquiry of drying dataCommand H
Page 35 and 36: HA40Inquiry / setting of languageIn
Page 37 and 38: HA402Protection against change in t
Page 39 and 40: x8 Temperature of level 1 of step d
Page 41 and 42: HA632 Definition of freely selectab
Page 43 and 44: 5 What if…?Tips from actual pract

MT-SICS - Mettler Toledo

Create successful ePaper yourself

Delete template?

Save as template?